Jump to content
KiteLife Forum

Paul LaMasters

Members
  • Posts

    818
  • Joined

  • Last visited

  • Days Won

    42

Posts posted by Paul LaMasters

  1. Northern Lights is a proven lighting item, you can spank the crap out of your kite and not diminish the intensity or dislodge the product in the slightest.  

    The lights are even drilled out, (molded, 3D printed, etc) with a place for magic sticks to pass thru, no extra tubes to carry along. 

    Rolled up into the string on the ground (calm-shell), slack lined, throws, probably a decent falling leaf if you are a more serious risk taker!

    Really bright for about an hour and then you change out to a second set of batteries if a long night session is anticipated.

    Buy a second charger and spare batteries, don't be that guy with dead lights on the end of the line.

  2. 3 wraps in the exp,…. So it is durable for yourself and others pilots just taking off

    yes you can mix frames, right now as three pieces for the LE, later (after breaking some tubes) consider a six piece leading edge, altering the stiffness and determining how it impacts the flight dynamics.  Most quadlined kites bend in the middle first, so you could make that area only stiffer.

    maybe you want it really flexible (@ the center of LE) to cup air pressure more, working on low wind and slack-lined tricks

    yes you can mix brands too, P-90s with GReen race, a hybrid frame

    i fly with tapered down spars on the verticals,… thick part next to LE

     you could fly your mid vent framed light and flexible, and the EXP framed heavy and stiff,…. In the same wind conditions, comparing your own tuned equipment,… when is one better than the other? What about tomorrow, does your opinion change?

    you are developing your own feel, which will influence future purchases, make em all fly the way you desire, so adjustable, so much fun to experiment

    enjoy and share your experiences please

  3. Tune all your quads so that they backup from resting inverted on the ground (leaders, add down)

    hide the speed differences (only going as fast as a side slide will allow, regardless of direction or orientation 

    practice inverted until you also confirm,…… the kite is easier, more controlled, dare I say more enjoyable? Upside down!

    cheat? Add sissy sticks, you won’t bow tie it rigged w/“magic”
     

     

    • Thanks 1
    • Haha 1
  4. Orvis large fishing rod case, holds 12-20 kites, fully padded, fits in the overhead compartment, used a bunch of times w/various

    the latest carry-it-all/25FM.html?adv=621658&cm_mmc=plas-G-_-brand-_-20172282745-_-25FM0153&gclid=EAIaIQobChMI6umps4O38AIVkfvjBx3NTweJEAQYASABEgLV0vD_BwE

    • Like 1
  5. some quads lend themselves to push-pull (Spirit and TC Ultras) as opposed to wrist rotation, (Revolution derivatives)

    Some are best at no wind vs. beach gusting

    no kite enjoys turbulent air

    some fliers like short string lengths and some go long

    "take the best, dump the rest"... = Everyone will offer advice, take their best stuff, make it your own, anything that doesn't fit you perfectly discard, repeat until you have your own unique style, visually recognizable, not by the kites you fly, NO by the way you fly kites!

    Enjoy the journey and your best investment is still a road trip (to meet up with others, you want to learn & they want to share)

    I have about 60 quads in all different styles and configurations, but the first one was a "Backtracker", followed by two Rev2s used from the Kiteloft, then a vented and a SUL 1.5 (it rained the day of delivery). My favorite kite is probably the Zen, I have owned four of them. Each was repaired repeatedly by Master surgeon before funeral rites were offered up.

    I am a big fan of Eliot Shook and Bazz Poulter as kite builders.  They will do exactly what you've paid for, regardless if that means deviating from the approved standard or trying something kooky out. (SUL leading edge sleeve on high wind vented kites, covers over knots, extra reinforcing patches, custom materials)

    What I like, you very well may not, choices are good enough for everyone to share the sky and enjoy each others company.

    Welcome!

    • Like 1
  6. Wait, you only want an old(er) sail, right? 'cause a bridle in good shape and a decent ST orSUL frame are worth more than you're offering, unless you get arrow shafts and nocks, with a Dacron set of bridle legs carelessly tied.

    can you replace badly worn individual sail panels, I mean a new leading edge sleeve and trailing edge pieces, for example?  Remember, at some point the original polyester, icarex or coated nylon fabric isn't even opaque to the wind anymore, flimsy and easily torn, not at all like a crispy new sail once was!

    I've sent kites in for the "kite doctor" to resurrect from the grave,... one came back with a note affixed that I shouldn't be allowed to place with nice toys!

    What is your ultimate goal? Maybe I can donate a sacrificial sail, but there's a reason it is free!  Rode hard & then put away wet!

    • Haha 1
  7. had some nice conversations with Pedro about quads, reinforcing and wear as it relates to a flailer.  

    As you may be aware, I don't fly like most folks, way harder on my stuff, "spanked hard and then put away wet" is my motto!  Anyway, my kites are reinforced beyond "stock" when ordered (for a decade at least) so the only wear-out point or at least the first encountered is the trailing edge.  Flick-flak, falling leaf and clam-shell roll-up tricks all force the flying line to abrasion along the trailing edge when round-up into the stings or unwound.  

    I've furnished some photos of the damage (even of the repairs) and shared some mutually rewarding comments with him about the Detox.  Great kites are being built all around the world now for all of us to enjoy.  I look forward to experiencing one for myself (of course w/my own choice of framing, bridle and the addition of magic sticks)

    • Like 1
  8. Nope, the thick part of the 2PT goes next to the leading edge, you want the weight forward, slack is the key to a solid looking axel, step into it aggressively whilst you punch that forward handle thumB

    slack you can wAlk in, not just catching the sleeve button on your shirt!

    • Like 1
    • Like 1
  9. Work both sides of the window, if you do a loop to the right make the next one match it going now to the left,..... if you can only do an axel one way, and it is perfect, but the opposite it beyond you, then you cannot do it yet at all! Show you own that both ways

  10. Had int'l mail from "down under", it was returned to the sender w/o reaching me,.... several times

    USPS said they'd tried to deliver it but my wife is home all day, every day and it was for HER!

    Eventually received the items, but not less than 6-7 months after first attempt at delivery.  Naturally, I paid for each shipment effort too

  11. Randy Tom method,

    sew all the fabric colored pieces full sized together, back-cut front and back layers away until reaching a single thickness, .... front side darkest color on top! Why? Nothing slips on expensive icarex, no hot tack holes, no spray adhesive removal, sewing is thru all the layers, back cuts are angled,.... this is your excellence, not for sale, for entry in competition against other like minded builders, national champ maybe?

    almost all of the fabric is waste!

    • Thanks 1
×
×
  • Create New...