Jump to content
KiteLife Forum

ISO:Wanted/snagless Quad handles.

Recommended Posts

Wanted/snagless Quad handles.

I've only got one set and am on a budget.  I'm trying to get my kids flying. Ideally I would like three more sets of used or new rev type handles.  Snagless preferred; however, I'm flexible.  Thanks in advance. 

  • Advertiser
  • Date
  • Price
  • Category
  • Brand
  • Model


Share this post

Link to post
Share on other sites

I've given handles away, mostly to my own offspring, but I seldom sell one w/o acquiring the replacement beforehand,... up-grading the length (or unloading unused sizes as it were), currently I have a back-pack with a few in there.

3 fifteen inch no-snag sets (one: 120-/100# skyBond, TWO: 60-/100#, three: 100-/50#), solid aluminum rods

1 thirteen inch no snag set (120-/100 pound or 170# if it's howling wind), solid aluminum rods

1 Rev2 handle set, extended to 19 inches thru the use of a carbon tube insert, affixed with a Rev end-cap, vinyl taped in place (1999!) steel tubes.  (45 feet of 90# LPG)

1 fourteen inch set of laminated wood, pistol-grip indexed for each hand, handles, (60 feet/50# SkyBond)

1 Titanium set, 19 inch tubes, 3/8 diameter, grade five, with wooden pistol grip indexed for each hand, handles

1 indoor set of Rev handles 14 inches (Carbon tube) (usually 100'/50# but sometimes as short as 45)

1 mini set of indoor aluminum 1/4" diameter tube handles from Ben Dantonio 7-8"?,... He said: "you'll figure 'em out" (the kite can carry them underneath in a gliding pattern, if pilot releasess handles entirely). 17 to 28 feet, as long as possible to fit the room.

1 set of Reflex handles (13 inch) carbon tube, indoor cross-pollination hybrid thingy, lime-ish green. (line length unknown!)

Additionally: 3 sets of "TC ULTRA handles, drilled-out plexi-plastic, shaped grip 13 inch handles for the baby Revs (80 feet, 100# SKYbond).  These handles ride in the case with the kites, not my back-pack. They're only used for one specify kite 42 inch leading edge 6-pack stacks (3) or Dugard's 36 inch LE 6-pack stack.  These 24 kites all fit in Brianne's Howard's custom fabricated hard-sider (case),


Ti handles.jpg

case two.pdf

Share this post

Link to post
Share on other sites

I'm sure you may have seen the method to convert normal steel handles to snagless..? Works a treat and quite a bit cheaper that actual snagless aluminium ones.

Sent from my SM-G970F using KiteLife mobile app

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...