Skip to content
View in the app

A better way to browse. Learn more.

KiteLife Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Issue 10 (Jul/Aug 1999): BORK - Building

Featured Replies

This month was a busy one with several notable flame wars. You won't find any of that junk on the following pages. After all this is the BEST of Rec.Kites - Thanks to everyone who makes positive contributions to the Newsgroup.

Once again I'm indebted to the faithful BORK staff:

  • Craig Rodgerson
  • Peter C. Hugger Editor

This page is a summary of postings on the rec.kites Usenet news group that our editors believe to be interesting and useful.

Opinions expressed in these postings are not those of KiteLife Magazine or its staff.


Building Contents:

  • Homemade Ferrules
  • Trick Kite Construction
  • Spreader Placement
  • Sewing Thread
  • Cutting Applique
  • Fabric Grain
  • Seams


Homemade Ferrules

I need some 12mm ferrules to join the sections of the longerons for the 2m-ish tri-d I'm building, but they don't normally come that big. So I thought I'd try and make some with one of those glass fibre repair kits as used for filling holes in rusty old cars by people, forced by pecunary circumstances to drive rusty old cars. (Been there, done that.)

First attempt: wrapped a turn or 2 of polythene (old shopping bag (well, not *that* old - maybe should have said "used")) around a length of 12mm dowel, then moulded the fibreglass round it. Worked pretty well - ony problem - can't get the dowel out (good stuff, this fibreglass). Anyone know what disolves wood but not fibreglass? Thought of recruiting a few death-watch beetles, but rejected the idea on the grounds that they might not know the word "stop" when they finished the dowel.

Probably should have varnished and wax-polished the dowel before starting. Polyurethane varnish and furniture wax?

Anyone been here before??

- Philip

=============================================================

Philip;

No need to get too fancy, good old wax paper wrapped around the dowel makes an excellent release. You can also add a layer of vasaline to the dowel first and a bit on the wax paper as well. Those ferrules should sliiide off quite easy.

later Geoff

=============================================================

Can you turn down some candles?, use to mould on then melt out. Tel

=============================================================

My tri-d has proved challenging in several respects but one more evening should see it substantially completed.

One of the trickier problems arose because I designed it assuming I could get 6' or 2m lengths of dowell, but in the event I could only get 1.8m. Anyway, that's too long for storage and transport so I needded to split them. (I'm using 12mm dowell.) Ferrules normally only come in sizes up to about 8mm tho' I can get Al tube up to 10mm internal (larger B&Q store in UK).

As I indicated in a previous posting, I hit on the idea of fabricating ferrules using a fibreglass repair kit, as used for filling holes in rusty old cars. A respondent (I forget who) gave me the key to success - greaseproof (or waxed) paper.

Wrap the greaseproof round a length of dowell as a former. Stick it down with double-sided tape under the edge, so there is greaseproof paper only in contact with the dowell, and on the outside. The greaseproof should be a fair bit longer than the ferrule you need 'cos the resin is messy stuff and goes all over the place. Wrap the glass fibre matting around the greaseproofed dowell - the hardest part is wrapping it reasonably tightly - keep it taught as you wrap it and stipple the resin into it. Make sure you don't get resin on the unprotected dowell or you won't be able to slide the ferrule over it and off the dowell.

The resin gets quite warm as it cures. As soon as it's more or less set, slide the ferrule off the dowell - it may be harder if you leave it until the resin is hard and has maybe contracted a tiny bit. I found it easiest to slide it off by making sure it would slide up and down a bit, then taking it by surprise. When the ferrule is quite hard, gently poke a blunt instrument (e.g. thin dowell) between the greaseproof paper and the fibreglass - the greaseproof should come away fairly easily. Finally, saw the ends off, to tidy it up.

I've made 2 12mm ferrules, around 6" long (to add a couple of inches to my dowells). They are light, and seem to be *very* strong.

- Philip


Trick Kite Construction

Hi,

I would like to build a trick kite, but I am not sure which construction plan to use. I have only found two complete construction plans so far: 1 - Mirage 2 2 - Trick Kite Tim.

If you have build one of these kites, please tell me if the construction plan was correct. Did you follow the plan exactly or did you change it? I am also interested in the flying characteristics: is the kite a real trick kite?

=============================================================

Hi hans,

Hmmm, far be it from me, a mere beginner, to advise, I would call the Mirage a sport - rather than a trick - kite. It's size puts it on the borderline, and I only flew mine for 1/2 hour last weekend before it broke my lines but it tracks dead centre of where you want it to go and gives no evidence of surprising the flier (me). The plans? Need reading about 300 times and then sleeping on for 2 weeks - but then it's the first I ever made and all the information is definitely in the seemingly scant instructions. (Be prepared to spend time on the bridle adjustments - dynamic is suggested in the plans and the more points you can move the better! (IMO)

(? http://www.win.tue.n...e2/mirage2.html ?)

(If you need help with the building, the above site has a link to the Mirage builders page - go to the french plan section and then follow links from there. The designers of the Mirage have links to the page and will no doubt be delighted to assist you.)

I also have the plans for TIM, but thought the Mirage (2, I hope) was more suitable to my needs, ie. sad wind, dodgy wind, little wind, novice flier, etc. For a definite trick kite plan, get J. Boyce's book (how to make and fly stunt kites) and go for the 'Tranquillizer'. Sounds and looks good if that's what you want. The Mirage suited me. (and today I rebuilt the bridle so look out Norfolk this weekend for a red and yellow beastie with blue sail tips...) I was that far <finger and thumb pressed tightly together> from axelling for the first time ever when the lines crapped out :ani_yahoo:( but that's cheap lines for you. The Mirage pulls like a train in a mere 6 - 7 mph wind. Go for it - you will not regret the time it takes to make.

Aik

PS I can't help wondering if 'Hi Hans' is a not good thing for a kite flier... -- There came a man to our town, and his name was Aiken Lugonn (né Drum). http://surf.to/a-edwards (but it's not too healthy just now...)


Spreader Placement

How do you determine where to place the spreaders on a stunt kite when you are designing a new kite? Is it a science or just a wild guess that you make by "eyeballing" it?

=============================================================

As a rough rule of thumb the T goes about 20% up from the tail and the top spreader about 20% down from the nose. When loaded up the spine tends to bend in an S shape, these positions help support the spine and minimise that.

As for weight distribution as a result of this, IMHO static balance generally has less effect than you might expect, only being really significant when gliding away to gain ground in light wind or in a side slide. Well at least within the bounds of reason :-)

If you're interested in designing your own kites I got this rule of thumb from Swept Wing Stunt by Mark Cottrell.

Ian Newham


Sewing Thread

What thread can I use for sewing? Can I use the bog-standard 100% polyester you get in the sewing shop (if so what thickness?)?, or should I go for something else? where do I get it if so?).

=============================================================

The best thread around is Dabond polyester, size V-30 or V-46. It is standard use for spinnaker fabric. Very strong, no fuzz. I think you can get it in the US from Into the Wind. Second choice, and probably easier to get in Europe would be Metrasene (sp). If they have different weights, get the lightest 100% polyester. It has a bit more fuzz than Dabond, but it's plenty strong and available in a full pallet of colors if this is important to you. Keep away from Nylon threads (including monofilament), they are harder to get tension right and stretch when you sew, which tends to pucker the fabric. Also avoid Blended threads like cotton/poly. they are too weak. Use a size 10 (70) or 12 (80) needle. set thread tension top and bottom very light, and light presser-foot pressure. 8-10 stitches/inch (more makes a weak, perforated seam). If you want to know how to do these adjustments, I can probably help. You may get very frustrated with your "cheapo" machine. There are many machines that just can't be adjusted to handle such light-weight fabrics well.

For other kites, is there >any general rule what material you use for them (size/type), and also the >thread you use for the materials...?

What kind of kites and how big? You usually want to avoid mixing different types of fabric such as Carrington and Icarex in a sail, unless you are using stretch to shape a sail. for most kites, 1/2 oz -1 oz spinnaker fabric is perfect, and for some larger kites, 1.5 oz works well. A fabric finished for spinnakers is coated with a finish that minimizes bias (45 degree) stretch, and is usually better that an uncoated, stretchy fabric like parachute or balloon (sorry , M. Lester) fabric. Carrington has a urethane finish and has a good amount of stretch, hard-finish cloths use melamine (acrylic) and typically have less stretch, but lower tear strength.

Hope this helps get you started,

Stan Swanson, Condor Kite Co.

=============================================================

Here are my thoughts on the use of sewing thread for kite making.

A lot of the kite hobbyist in my area use #33 Nylon threads that are available from The Kite Studio http://www.users.fas...udio/index.htm. Yes you do have to readjust you’re machines tension on the bobbin and upper threads, but It is my favorite for Reverse Applique (also known as the Randy Tom method) sewing because it has a larger diameter it is harder to accidentally cut while I’m relief cutting. My relief cutting skills have improved in the last six months because of a large kite I entered in the cooperative category at Smithsonian Kite Competition, so on my next project I might try using Geutterman’s 100% Polyester thread.

I have ordered thread from Tom Marvin at Hang-Em-High Fabrics http://www.citystar....-high/index.htm, but alas I have not tried it yet. It is V30 Dabond Polyester but it is only available from him in white and black. I’ll let you know how it works when I use it. If anyone out there has a source of this thread in different colors, please let me know, at [email protected].

I have used, and it is my favorite for sewing panels together, the polyester produced by Geutterman. It is available almost everywhere in a large pallet of colors. It is much more expensive compared to the afor mentioned threads, because of the large quantity they are provided in.

I recommend using the sharpest needles you can find when sewing Ripstop Nylon and Polyester. I use Schmitz denim needles exclusively.

You should also go to www.kitelife.com and read the “Welcome to the Machine” articles. They helped me out a lot.

Where do you live? If you have a kite club in you’re area, go to they’re kite-building workshops. I am a member of 4 clubs (WOW, RAF, MKS, and the Keystone Kiters) and they all have workshops from time to time. I try to go to all the workshops I can. You never know what you can learn.

Take it easy,

KiteSquid


Cutting Applique

Hello,

I've been reading with interest the thread about kite sewing materials. I have made some rough applique sails, but I need one tip: what is good to use to cut away the material behind (or in front of) the applique piece?

Thanks in advance.

=============================================================

Jason Stotter

In my limited kitemaking experience, I have run into 2 schools of thought on this - Some builders use a good quality seam ripper - make sure it is sharp AND the ball is down. Others use a very small pair of 'Quality' scissors - making sure the point that is down against the fabric that you're leaving is rounded and smooth. If the shape you're trimming out has gentle curves and straight lines, with practice you can gently 'push' the scissors along without 'scissoring' them and produce a much neater result.

Hope this helps and I'm sure you'll get many more answers.(practice - practice - practice) Another tip - before you sew your pieces together, cut a slit in the piece that you're going to be removing for an easier start than trying to 'pick' one layer of fabric off another without damage. Art Cross

Go build a kite! (Kite studios's slogan)

=============================================================

Hi,

I've used lots of various tools to relief cut applique, and I recommend Mondial applique scissors...mine are marked with model number 585. They have a "flat blade" on one side and a regular scissors blade on the other (which I've ground to a slightly rounded tip). They are incredibly sharp for "straight cutting" without the scissor motion, and they're a really good size for working large and small pieces. For examples of applique kites I've created using the Mondial scissors, check out the SkyArt SportKites and/or kitebag sections of my web site: http://members.aol.c...fun/flight.html

(I do use a seam ripper to make a "starting hole" in the fabric to be removed.)

If you need additional hints on using the Mondial scissors, feel free to e-mail me directly. Best wishes!

Steve Rezac

=============================================================

My approach is a bit different. I like to use the same shears (I use mondial or marks 8" knife-edge shears) that I use for all my fabric cutting. The larger bottom blade prevents you from getting too close to the stitching. they also have a slight curve, which keeps the tips from digging in to the bottom layer of fabric. One thind I have found with this, it makes a big difference whether you are cutting from right to left, or left to right. I am left-handed, but my distributor doesn't carry these shears in LH, I use the ones made for righties. using these, the offset between top and bottom blades allows me to cut away staying very close to the stitches without clipping the treads. Right-handed folks (you know who you are), could get the same effect by using a pair of left-handed shears. It's kind of hard to describe, but try cutting the opposite from your normal direction and you may see the difference.

Stan Swanson, Condor Kite Co.

=============================================================

>Another tip - before you sew your pieces together, >cut a slit in the piece that you're going to be removing for an easier >start than trying to 'pick' one layer of fabric off another without >damage.

Man, Over 10 years of hard corp kite building, and i have to read that here!

Thanks Art, you never stop learning. What a great tip!

total AoxomoxoA brought to you by. . . . . . dean jordan

=============================================================

Hi Kite Building Friends,

I have been using the "Randy Tom" technique with wonderful results. Jose Sainz taught this at a Wings over Washington workshop. Maybe you could get him to come to you’re clubs next workshop and teach it to you. It is a reverse applique (cutting the fabric after sewing vice before sewing it) technique that requires a little practice and it helps to see a demonstration. I will try to explain it here.

Tools: He uses a slightly modified pair of dressmaker’s scissors (he likes the Wiss model W715) which I learned on and have sold to friend because I have large hands and I needed a longer pair of scissors. I purchased an inexpensive pair made by Marks (I don’t have the model # handy) at a craft store for about $8.00. I will buy in the near future a pair of J.A. Henckels (Model 41900-161) for about 22.00 in my area, or a pair of Gingher (Model G5) because they should stay sharp longer than the scissors made by Marks. This is due to the use of higher quality steel and different sharpening angles. BTW, if anyone knows a dealer who has good prices on these scissors, please let me know.

Technique: You use them upside down (the pointed blade down instead of the rounded blade) so you can get into the corners. He also slightly rounds the non-cutting side of the pointed blade so the scissors glide across the fabric. You also run the slightly opened scissors up against the zigzag stitching so there is no little bit of fabric hanging out (as in the seam ripper technique).

You also have to keep you're scissors very sharp, as kite builders we should all learn how to properly sharpen our scissors and rotary knives, it makes cutting a lot easier, safer, faster and a lot more fun. If you do not know how to sharpen you’re scissors, learn the proper technique now, or you could mess up a good pair in a hurry. If you use Gingher scissors look at the angle that the blades are ground at. They aren’t the same, so extra care should be exercised when sharpening them. I would suggest you learn on an inexpensive pair.

Good Luck KiteSquid

=============================================================

Gingher make a pair of duckbill applique scissors that I use and find work very well. The lower blade is shaped like a semi circle and it allows you to keep the point of the blade from cutting through the lower piece of fabric. They are extremely sharp. I think they cost around US$28.00 but they are well worth the price. I have 4 pair of Gingher scissors (one left handed pair ) that I use for applique and cutting ripstop and nothing else. My wife & kids know not to touch them upon the pain of a very slow and agonizing death!!! Richard Dutton

=============================================================

I just had to agree with Dean's assessment of this one. I will add another tidbit that I have learned. In small, itty bitty places, I have learned to use a stick pin to pull the layers apart, pull a few strings of the layer being removed, allowing me to get to the layer I want, and then go at it with any one of a variety of scissors that I own. The best ones I have found are at flea marts that have a bent tip, they come in two sizes for $6.00-$9.00 a pair. Seam rippers are great too!! Sausage like fingers can't adapt to the small scissors. Kathy G.

=============================================================

For us people with Sausage like Fingers, try the Fly-Tying market, you know places like large sporting goods stores, or tackle shops, or even the fishing rod wrapping stores. I found a pair of very fine tipped scissors with eyes (the hole you stick the ground, spiced and cooked in a casing, meat product that is connected to the end of you’re hand) that are larger than anything available from the usual scissors manufactures (Gingher, J.A. Henkles, Mondial, Wiss, etc……)

These are carry over from the surgical markets. Doctors can pay big bucks for stainless steel products that have limited applications. Us Kiters can benefit from that.


Fabric Grain

I am constructing a stunt kite which has seven panels. The plan does not include instructions on proper alignment of the grain. Do you align the grain along the longest side of the panel you're making? Is there a right or wrong way to do this?

=============================================================

the usual rule is to keep the panel in line with the leading edge of the kite, this then cuts down on the fabric streching. if the panels are not ajacent to the leading edge, align to the outer edge of the kite the panel is on. and where you've got a panel that doesn't have an outer edge to it! try the best alignment to the ajacent panels. but then rules were ment to be broken!!! I've built the odd rokkaku ignoring them! and they worked well. regards, Peter Dawson.

DIVIDERDIVIDERDIVIDER

I don't know what kite you're making, let us know and maybe we can be more specific.

In general, above the lower spreader keep the ripstop aligned in line with the lower spreader as this is roughly the direction in which most stretch occurs, also panel layout permitting try to keep the ripstop aligned with the trailing edge. This is where the fabric will go baggy first if you get the fabric aligned wrong.

To give you a rough idea, the least stretch layout is generally considered to be the radial pattern, with the grain of the fabric radiating from the T.

As always YMMV, there are exceptions to everything and always someone to argue about them :-)

Ian Newham


Seams

I'm having some trouble teaching myself how to sew "flat fell" seams that don't "bunch up" or pucker, which causes waves in the fabric that radiate out from the seam. I'm trying to make a nice, flat, taut 8 ft. tall Rokkaku sail with a seam right down the middle, and those waves have got to go!

I've been very careful in my setup, using little squares of double-back tape all along and just behind the first stitch line (not *inside* the seam; the tape is removed after sewing) to preserve alignment perfectly. That part seems to work just fine. Likewise, I've been very careful in the setup of the second stitch line, although I don't use any tape at that stage. Still, moving slowly through the machine, everything looks good; nice and flat.

After removing the completed piece from the machine and laying it out on the table, it seems allright at first, while I trim the threads and look at how my stitch lines could be a little straighter <g>, etc...

Now, maybe I'm just not noticing the problem right away, but it sure seems like the puckers *develop* after a few minutes. They're not present along the entire seam, but appear in clusters that look like they might be evenly spaced! I've got two 8 ft. sails that exhibit the problem now, and - son of a gun! - the puckers are in pretty much the same place on both sails! Three groups, almost evenly spaced along the seam.

What could be causing that?

Have I got a thread tension problem? Is it possible that the machine goes slightly out of sync every-so-many stitches? (It's a Pfaff Tiptronic 6230.) Or more likely, is there something in my technique that's causing the problem?

Any ideas? I realize there's not much info in my description for you to use in diagnosing the problem, but I'm hoping that it's a *common* problem, and I just haven't gotten the word on how to deal with it yet...

So, how 'bout it, all you old-time sewing masters? Should I give up my dream of becoming the world's best kite maker, sell my machine and go back to pumping gas? Or will you impart some ancient wisdom that will allow me to acheive my dream?

Failing that, could you at least tell me how to make a decent flat fell seam without all those darn wrinkles?

Thanks!

--Chuck Henderson

=============================================================

Hoi

Don't give up yet...

If you use nylon thread, throw it out and start using polyester.. that should help.

It can also be thread tension problem

If you let the bobbing dangle on the thread, it should not move, unless you give it a little tug. Ajust the screw on the bobbin till it's close to sliding down.

Having done that, put a different color of thread on top (same brand and thickness!) and try sewing some cloth. If the upper tension is ok then the "knots" should be in the cloth and the color of the bottom thread should not be seen on the top and vice versa.. Adjust until you archieved that.

Third, while sewing keep the cloth taught (one hand behind and one in front of the walking foot..) and let the machine do the transporting.

You could also check my page for sewing tips and such...

Hope it helps

Regards, Peter

=============================================================

Hi Chuck, Sounds like you are tensioning the material as you hold it. Don't pull it, just guide it. Let the machine do the feeding and it should be ok. Dream on Tel

=============================================================

Peter has the right idea with the tension on the bobbin. I sometimes go to that point then make it a little looser, just so the thread feeds out slowly as its hanging there. I also check tension when I change colors, you will be surprized at the difference some colors have. Sewing kite fabric is completely different because its so thin. Good luck. Let us know how you make out. Ed

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.