Skip to content
View in the app

A better way to browse. Learn more.

KiteLife Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Issue 10 (Jul/Aug 1999): The Flying Eye

Featured Replies

Hi! My name is Carlo Didier and this column is intended to bring to you a subject that has much to do with kiting but which hasn’t been mentioned in KiteLife as yet: KAP - Kite Aerial Photography.

So what is KAP? To put it simply, it’s a camera on a kite’s line. That’s the basic formula and any higher stage of sophistication (and complication) is possible.

What is it good for? It’s a cheap way to take aerial photographs and it’s even used professionally by archaeologists, geologists, meteorologists and others more. Its advantage is not only the low cost, compared to planes or helicopters but also the simplicity of use. The whole equipment, including the kite can weigh less than 4kg (something like 8.8185lbs for those who still use those screwy old-fashioned units) so it is very transportable. And you can have your camera in the air within ten minutes and keep it flying as long as you wish, provided the wind keeps blowing. Sounds interesting? Want to know more? Keep on reading…

post-1-0-91764800-1321657946_thumb.jpg
Some time ago, I had a discussion with a friend who is, like me, an amateur photographer. We talked about taking aerial pictures and about the high costs of planes, helicopters, hot air balloons and so on. Then I remembered having read something about taking pictures from a camera suspended on a kite’s line (in a French magazine named ‘Chasseur d’Images’). I found the issue with the article and after studying it we decided to give it a try. The vendor from the only specialised kite-shop in Luxembourg (Europe) put us in contact with the president of a local kite club who agreed to build us a custom Rokkaku. Then we build our first rig from aluminium and, after some small problems, we really got our first pictures (see picture). Now we are planning our second rig which shall be made of carbon kite spars. But now to the techniques.


The whole thing can be separated into four parts: the kite, the suspension, the rig and the camera. Let’s start with…

The Kite

First you should know that there is no perfect kite for KAP. Different people use different kites and it is much a question of preferences. But there are some conditions a KAP-kite must meet:

It will most surely be a single-line kite, although someone might try a dual-line, but I’d love to see that work.

Most of all, it should be as stable as possible in the wind conditions it will be used in. If you have between $100 and $300 (or more!) worth of equipment suspended on it, you want to be sure not to crash it. Bridle tuning can become very important because the suspended weight changes the angle at which the line pulls on the kite.

The kite must pull strong enough to be able to lift the equipment, which may weigh between 1kg (2.2lbs) and 5kg (11lbs) (you will see why this can get so heavy in the part about the rigs). Note that a kite that pulls 20kg on the line may well not be able to lift 2kg suspended on the line. Pull and lift capability are not equal and the farer away from the kite, the less lift you get. Just remember that you can walk a kite down without much force even if it pulls on the line like a horse.

It should be simple and quick to mount and dismount. A Cody might be a good KAP-kite, but if it takes you 20+ minutes to mount it, you won’t do that to just quickly take some shots ‘on the fly’. It’s just inconvenient.

You can use trains. I’ve heard about meteorologists using two Rokkakus of different sizes either separately or together to adapt to different wind conditions. But remember that it might become difficult to launch a train if you are alone.

post-1-0-68658700-1321657971_thumb.jpg
What kites are used by those who do KAP? Deltas, Rokkakus, Delta-Conynes, Sutton Flowforms, Multi-Flares and Genkis are most common. Personally, I use a custom made Rokkaku (see picture at right) 2.5m long and 1.8m wide. It flies very well even in low winds but needs more wind to lift our (first) rig which is on the heavy side with about 2kg (4.41lbs). It’s very important to suspend the rig at the right distance from the kite. Too near and the kite gets uncontrollable and kite movements and vibrations get through to the camera. Too far away and the kite won’t lift it up.

The Suspension

There are two possibilities: the Pendulum and the Picavet.

The pendulum is simpler and more intuitive, so let’s start with that. It’s just what the name says: a pendulum. It’s really simple. The line hook-up is a very important part. It should securely fix the pendulum on the line without damaging the line. It can be as simple as a flat piece of wood with 2-4 rubber knobs around which you wind the line (don’t forget a security to prevent the line from slipping from these knobs!).

post-1-0-63150900-1321657993_thumb.jpg
The Picavet suspension needs more explaining. Basically it is fixed at two point on the line, with pulleys guiding a line between the hook-ups and a cross on which the camera rig is fixed. Picture at left shows the details. The cross can be anything from 10cm to 50cm. Too small and the Picavet won’t work effectively. Too large and it gets clumsy and heavy. The hook-ups should be spaced by about 2m on the line and each leg of the suspension line would be around 1.5m giving a total length of 8x1.5=12m. These measures are just a first indication and can be varied. You will have to experiment a little. A very important thing is the sequence how the line passes the pulleys. Referring to the picture, it would run like this: A1 - 1 - B1 - R - 4 - A2 - R - 2 - B2 - 3 - A1. You can simplify by leaving out one of the upper pulleys and just tying the ends of the line on the hook-up instead of making a loop. The effect of the picavet is that the cross, if there is some weight suspended beneath it, will always stay level. The disadvantages are a higher complexity and weight and the need for two hook-ups. It is not as simple and fast to mount and dismount as a pendulum.


Next time we will see the rig, camera and remote control.

If you want the most complete and competent information about KAP, there is one site which can be said to be The Reference: Charles C. Benson at http://www-archfp.ce...rkeley.edu/kap/

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.