Skip to content
View in the app

A better way to browse. Learn more.

KiteLife Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Issue 11 (Sep/Oct 1999): BORK - Kite Stuff

Featured Replies

The dog days of summer have seen the cessation of the previous month's [June... (c8] flame wars. We do enjoy the positive contributions that so many make. Keep up the good work!

Once again I'm indebted to the faithful BORK staff:

  • Craig Rodgerson
  • Peter C. Hugger Editor

This page is a summary of postings on the rec.kites Usenet news group that our editors believe to be interesting and useful. Opinions expressed in these postings are not those of KiteLife Magazine or its staff.


Kite Stuff Contents

  • Dyna Kites
  • Rev Stacks
  • Line Strength
  • Kite Lights
  • Newbie Question
  • 3D Standoffs
  • Illusion Problems
  • Tapered Spars
  • Multiple Stunters
  • Line Lengths
  • Camera Kite
  • Fighter Kites
  • Dog Stakes
  • Joining Lines
  • Fighter Book


Dyna Kites

I have a Dynakite Stuntmaster (with the 33" x 44" single-coloured sails) 6-pack that is missing the lead kite bridle. I just got packets of 3 train lines with the set but no bridle line or snaps. I'd be much obliged if someone could post the bridle dimensions to give me a head start on trial-and-error. I'm assuming that 200# spectra will do the trick.

[if it's relevant, for the moment I'm not using a phantom frame as the pack came with a lead kite kit with fibreglas reinforcement rods.]

Thanks in advance,

Michael

====================================================================

Mike - I'm sure you're going to get many replies but here are my thoughts. If you contact John or Chris at Dynakite, I'm sure they would gladly send you a bridle. I fly a '6-pack' of Stuntmasters which I built up myself, starting with 3 kites. I've tried the 'lead kite kit' and never had much luck with it -IMO the 'phantom frame' does a much better job (also available from Dyna at a reasonable cost if your dealer doesn't have it).Once you get the 6 flying, I'll bet you'll want to add more, in which case you'll defininitely want the 'phantom frame'! Art

====================================================================

Thanks for the reply, Art. Well, I may take you up on your recommendation on the phantom frame. Today I assembled the kites as a three-stack, primarily to give it a go with the bridle I fashioned by-guess-and-by-golly, using the lead kite kit. I left the tails off for simplicity, which didn't seem to make that much difference for the bridle setting I started with. The winds were fairly stiff at the time, around 12-15 mph. It flew pretty well considering, but could probably use some more tweaking if I weren't going to switch to the phantom. As it turns out, I did have a little bit of difficulty keeping the little wire retainer bits tight on the cross-spar, which in turn came dislodged on a moderately hard landing not far enough to the edge of the wind window, I'm embarrassed to admit. I'm sure I've got various bits of broken pultruded spars from other kites with which I can fashion the sailless front frame you suggest.

There's something very attractive to onlookers about a stack. Not sure about trying a rotating backflip on 'em 'though. I did manage to accidentally get them to hover in almost flat mode, stacked up, kind of drifting in a semicontrolled glide at the edge of the window for a few seconds. That was neat. Probably couldn't do that as easily with the tails on.

I'd be interested in hearing more from those out there on their experiences with stacks. Gary Engvall, where are you? <vbg>

Michael

====================================================================

Mike - Me again - You're lucky you recovered from the 'float' at the edge of the window - Dyna stacks usually don't like this,often tumbling into total disarray, especially with tails and more than three kites. My stack totally lost wind once at the top of the window and tumbled all the way down. It took me about 2 hours (honest) to untangle (finally by removing the tails and disconnecting a few kites). Lesson learned = avoid the edge! Another type of mess to avoid if you can is if your stack is staked downwind with the kites on edge, ready to launch, and a wind shift occurs causing the entire stack to roll over and over - total 'mashugina' (sp?). Keep flying your stack and have someone video it from the side and zoom in and out - beautiful! Go fly a kite, or several. Art

====================================================================

I have the same kites only in a 12 stack and do use the phantom frame. This takes the load off the lead kite and makes adjustements for wind conditions very easy. I havent seen them flown without the phatom frame. If it is possible, them that line set should have been in the set. Call DynaKite and ask, they are really good about customer support.

Allen

====================================================================

Based on the feedback I'm getting and that one outing, I'm now inclined to go with the phantom frame. While there may be an add-on available for that, judging from the photo on the package (which looks like a 24-stack, by the way) I might be able to fashion one out of some pieces of .2300 or .2400 pultruded carbon. I think I have some A20 fibreglas down in the basement that might also work. I reckon that if I build the triangular frame roughly the same size as (or maybe a little smaller than) the dimensions between the bridle/leading edge attachment points on the kites, that might do the trick, eh? I have some clear vinyl tubing that I'll use at the corners to connect the phantom spars. The frame would be mounted one standard train line length out from the lead kite. I'd still have to fashion a bridle but now I've got a bit of a head start on that. Comments, anybody?

Allen, I have a feeling that I may have seen you and your stack fly either at Ajax or Niagara, and getting a couple of them going at once was quite impressive. They have a special place for me, maybe because Gary Engvall once set up and let me fly a 12 at a time when keeping *any* kite from unintentional landings for more than five minutes was a major accomplishment for me (not that I've progressed that much since then).

Michael

====================================================================

Hi Michael, ho folks.

Just my 2 cents.

A20 may be a little bit flimsy because of its thin wall, for a phantom frame. Using graphite 0.2300 or 0.2400 seems better. Our team fly stacks of 5 Dynakites and I have tried stacks of up to 30. The phantom frame spars may be subjected to some high compression forces that may result in buckling if the spars are too weak. You can always adjust the bridles to lessen the pull. Then you can fly a stack in high wind and minimize risk of breaking anything. These stacks are a real crowd pleaser with the presence they put in the sky (you really fill the sky in 3D). Plus the noise add to the dramatic effect. The Windjammers were a big hit in Miami last April.

Wind or no wind, fly for fun :-)

Jean (Johnny) Lemire

====================================================================

Mike - Another thought - The three lines between the frame and the lead kite don't have to be as long as the train lines, since all the frame is doing is taking the strain off the lead kite. Just make sure they're all the same length! Also, a good rule to follow when flying your stack - don't let your last kite get past the edge of your window or it can falter and bring down the whole stack - especially in lighter winds. :-) Art

Another suggestion, Mike - if you do make your own frame - Make sure you glue the plastic tubing together as it will tend to come apart! Art


Rev Stacks

Hi NG!

I want to build a progressive train with a Revolution II (Front with Bridle), a Rev 1.5 in the middle and the Rev behind. Does anyone know the line lenght between the three kites? Are they the same between the different kites?

Thanks in advance and

====================================================================

Have a nice Breeze

Torsten

I set mine up with 5' equal length lines at all 7 points. I then adjusted it so that the II to I.5 was 1' shorter. It's fairly stable now, with just a little bit of flutter on stops and backwards flying. What I need are longer handles...I've got I handles and it's still tough to get good backwards flying. Maybe I'll make a set myself...

====================================================================

Hi Eric, hi folks,

Revolution makes handles that are longer than the Rev. I handles by a good two inches. These are mostly used in low wind but our team use these all the time on our Rev. 1.5 SLE. It makes the kite more sensitive since hand movements are amplified more with the extra length. This may solve your problem.

Wind or no wind, fly for fun :-)

Jean (Johnny) Lemire

====================================================================

Hi Eric, Hi Jean,

Never thought to tweak the back lines shorter. Sounds like something to try.

Those long throw handles, or SUL Handles are the best way to go. They do take some getting use to. They do make everything easier, including stack reverse. Their even good with Rev II's! And they are much easier on your wrist. Which helps people with different types of wrist problems, as well as preventing kite fanatics from developing any of them.

As far as line lengths... from a lazy everyday kinda flyer. I just use "5" points. Even lines. Experiment between 12 & 3 ft., though somewhere in the 5-7 ft. range is pretty good. They say to have the stack lines at least 1/3 the length of your leading edge. I've seen (and flown) all sorts of stack lengths so I think it's what works for you. Good luck! BB Penny Flying like I mean it~ Laser Pro Gold Flying the best~ Revolution

====================================================================

I've found that 4.5 ft gives the best performance on the Rev I stacks.

Longer train lines will give you more power, Shorter gives you better control.

Longer handles are good to a point. with long handles, you use your forearms a lot more. The very long handles -- longer than 12 inches are good for light winds. for big winds, don't use anything longer than the rev graphite stack handles.

For the Rev II stacks, I would suggest 3 ft. train lines

For a 1.5 stack, I would start in the 3.5 to 4 ft. range.

For a progressive stack, the train lines will end up being different lengths depending on the position of the train line. i.e. the center line will be a different length than the wing tip lines and thes will be different than either of the vertical lines.

As for the number of train lines, I would recommend one at each bridle point, with the only exception being small Rev II stacks with 3D line sets attached, where you would only do 4 lines(at the verticals).

Milage may vary

Sam Ritter


Line Strength

You are thinking about static force only i.e. you are 70 Kg and you always stay on the ground hence no need for 300 Kg lines. I reality you can get forces that are much bigger than you weight once you factor acceleration in - > F=M*A (good old Newton!). The force is proportional to your mass and the acceleration. I don't think that you will see acceleration of 4m/sec^2 but you will definitely experience forces of more than 70Kg.

====================================================================

Err... yes and no. The '70kg static load' corresponds to an acceleration of 1g, i.e. 9.8ms-2, i.e. 70kg is a force of 686 newtons. To quadruple that Force requires an acceleration of 4g, or 39.2ms-2. I agree this is unlikely, though not impossible - it depends *how long* this acceleration goes on for, and is why people sometimes mutter about 'shock loads' when justifying high line strengths.

====================================================================

More relevant is the fact that a line rated at X kg static load will, in practice, break at X/2. I've tested this on a jig, using a variety of lines.

Interesting... were these lines knotted when you tested them?

Assuming we're flying dual line kites here and we're not flying a 40 piece powerkite stack with the lines tied to a bulldozer...

I often have a discussion about line strength with customers. Some rate power kites by the advised linestrenght in the catalog. I always wonder how manufacturers or re sellers come to these figures.

Sure it looks cool to advise 200 + kg lines with a certain kite, but I doubt (understatement) if it's needed.

First of all, most of us have no idea, we talk easily about 100 kg pull for example , but have no clue how much that is. Do a little experiment: attach a spring balance (if that's the right word: a thinghy with a spring in it to weigh goods) to some handles, and let someone pull it horizontally with 25 kgf. You'll be amazed how much that is.

As for the lines themselves: there are still lines out there that have a rated breaking strength: you know the breaking strength of a single fiber, multiply it with the amount of fibers and there you have your line strength. Wrong. The actual strength will be substantially less.

I have a small firm that braides lines for me, they rate lines at the tested breaking strength, and substract 10 % for irregularities in the line. Wonder how many other line manufacturers do that.

Knots reduce the breaking strength: a "normal" one would bring the breaking strength down to 60 %, ther are some very complicated ones that only give a 10 % reduction, but I doubt if any one uses them. (some fishing manuals have different knots and a rating how much the reduce line strength) Clips do the same thing: due to the small diameter of the wire they're made off they're a potential breaking point. That's why I always use sleeves for power kites.

Another thing is when you've flown a few times, your line wears due to sand caught in the line, or salt crystals developing when you fly at the beach. Usually this happens inside the line, so it's hard to spot.

To go back to the original question: no need for 300 kg lines (exept when you want an expensive way to slow your kite down). 150 kg (real breaking strength) is enough in most cases, 200 kg if you want to be on the safe side with very big kites.

But never forget to check your lines regularly for visible wear. Most people forget that a line is easly damaged on the ground: a piece of glass in the sand or other junk half-buried can do serious damage..

Regards, Peter

====================================================================

>Interesting... were these lines knotted when you tested them?

Yes, using a simple overhand knot, which is the one I see most people using most of the time ( and which I use most of the time :big_bangin:). I tested a few different Spectra/Dyneema lines from a quoted 25kg up to 150kg, and some regular Dacron. Basically got the same result with all of them - 50-60% of 'quoted' strength.

>I often have a discussion about line strength with customers. Some rate power kites by the advised linestrenght in the catalog. I always wonder how manufacturers or re sellers come to these figures.

Me too...

>Sure it looks cool to advise 200 + kg lines with a certain kite, but I doubt (understatement) if it's needed.

Knowing that I must derate that by 50% for a realistic real figure makes me happier about it, but at the end of the day it boils down to safety margin...

>First of all, most of us have no idea, we talk easily about 100 kg pull for example , but have no clue how much that is. Do a little experiment: attach a spring balance (if that's the right word: a thinghy with a spring in it to weigh goods) to some handles, and let someone pull it horizontally with 25 kgf. You'll be amazed how much that is.

Absolutely ! All of the lines I tested were like cheesewire ( very very stiff/taut - no way you could bend it with your fingers ) long before they broke. If you tapped these lines with your finger, they'd 'ping' !

But, at the point you get lifted off the ground, perhaps the line *is* that taut - theres no way you're gonna know if you're busy hanging on, or let go straight away.

And also I think the length of lines will affect how taut they appear to be. A short length of line will, I think, appear stiffer for a given load than a much longer length.

My tests were done on 60cm length by loading the line slowly, and allowing the line to stretch, which takes a finite amount of time. I'm interested in doing experiments on shock loading, but haven't given much though yet to experimental design, or the equipment required ( much more sophisticated than static load, I think ). I suspect this sort of experiment is not at all new, but I haven't investigated further.

MdeR. ---


Kite Lights

FYI, I found a great light for use on kites. It's called the Photon Micro-Light II. It's really small, about the size of a couple of quarters stacked. It weighs about as much as a quarter (0.25oz). Comes in all colors, including white. And it is really bright for the size! I plan on creating my own UFO reports by hanging one under a fighter at night. Too much fun...

The homepage for the company that makes it is at

http://www.photonlight.com/index2.html

The best price I've found for the two of the brightest models (blue and white) was at REI at http://www.rei.com/

cgi-bin/ncommerce3/ProductDisplay?prrfnbr=6859&prmenbr=8000

====================================================================

The other night I saw a person fliying a two line stunter with some kind of a strobe light. Are these made for kites or did he get it somewhere else and put it there. I asked him and he told me that I could but it in a website and he gave me the address, but I couldn't find it, I mailed the people from the website but they didn't know anything about the light. I've done web seaches but the only kite lights I've found are the "Ultra-Lites". Do you know of any other type of lights for kites? Where could I get them?

Sorry for being such a bother, and thanks in advance.......

Jose

====================================================================

Jose, Check out the 'Lightman Xenon Strobe'. It's available from Into the Wind Kites for about $25, colored lenses $9. The strobe and lenses are not available via their web site, www.intothewind.com , but it is available through their catalog which you can request at the web site, or e-mail them at [email protected] . You should get a copy of their catalog, regardless. Decent selection and great service!

Steve [email protected]

====================================================================

I buy the lighted bobbers for fishing. They last pretty long if you don't crash them into the ground very hard and they are only a few dollars. They do add a bit more weight than some of the smaller lights so adding a lot of them is not an option unless you have a good wind, but they do show up well.They are perfect for the kids buying big toys that cant afford the little ones, LOL.

Collette

====================================================================

Mike Delfar has some for $8.50 realy lite and brite. Look great. bigair@pitn He has sold a lot of them. Later Jug

====================================================================

I saw Gary Engvall fly a white single-line delta of about 15-foot span one summer evening a few summers back down at the waterfront at Humber Bay Park, Toronto. If memory serves, he was using a strobe much like the Lightman Xenon strobe (mentioned elsewhere on this thread as being available from Into The Wind). It seems to me that he posted about it some time back -- a dejanews search might give more details. In any event, it was most impressive, and certainly had the locals craning their necks....

The evening of our recent Canada Day holiday I put up a 4' Spectra Star rok with a set of Ultra-Lites strapped aboard. They consist of 3 white (clear) lights, powered by 2 AA batteries and coming in at about 2 1/2 ounces according to the manufacturer. I mounted it with one of the lights on the vertical spine, and the other two towards the ends of the top cross-spreader. For the wind conditions at the time, it seemed to fly best with the battery pack strapped just above the middle of the spine, about 45% of the way from the top. The winds were gusty down low, about 10-20 kph (~6 to 12 mph), but once it was up a ways it flew pretty well with the extra weight notwithstanding the relatively small size of the kite (for a rok.)

The picture that comes with the Gravityworks Ultra-Lights package shows the three lights mounted on a dual-line stunter, so that it nicely lights up the side of the kite facing the flyer, where the frame is. This would be highly visible on, say, 100-foot lines and the reflection on the sail. On my rok, however, the frame is on the lee (back) side of the sail, of course, and the lights shine through and pick up the colour of the fabric at that point. So on my rok I was getting yellow, red, and tealish green effects respectively at the 3 light points. They aren't as powerful as a strobe, certainly, but were still quite visible 3-400 feet up. The rok flies at a pretty flat angle relative to the ground, so that most viewers would have the through-the-sail perspective.

If one were to go to the Lightman strobe or equivalent I think you'd be getting greater visibility and the flashing effect, at the cost of an ounce or so of weight and having just the one light source.

Great fun in any case.

Michael

====================================================================

Strobes are nice but do have a drawback on moonless nights - you loose your orientation with your kite. I have flown with strobes on my Jam Session for about a year now and they can be seen from miles away (kool) but as the skies get darker, it is really hard to determine the speed, angle and direction of your kite. Also it makes it very hard to land (softly).

You are better off with NON-flashing lights - I fly with these also - and it is a lot easier to night fly and less crashes. The Professor

====================================================================

Hi Steve, hi folks.

At the last Wildwood kite festival I saw Captain Eddie's Flying Circus use the "Ultra-Lites" lighting system. This put three very brilliant beams of ligth shining on the kite sail. Very cool and quite spectacular.

Take a look at:

http://www.cuttinged...com/u-lites.htm

I have no affiliation with any of the above mentionned company or team. Except that I can appreciate a good product after seing it perform well.

Wind or no wind, fly for fun :-)

Jean (Johnny) Lemire

====================================================================

See my posted reply to "A great light for kites" and the other posts in the thread. Do a power search on www.dejanews.com for 'lights'. If the strobe you saw was a red unit about 2 inches x 3 inches it may have been a bike riders strobe. They work okay, but the flashing is disorienting. Cyalume light sticks are IMNSHO, the best for _flying_ purposes. Next I want to get a bunch of the 18 inch stands and put them inside a tubular tail. . .

Crash 'Area 51 Kites' Johnson

====================================================================

Hi,

Try this site. You'll find plans of light systems, called "Alone in the dark", "Alumiznium", ..... It's in french but.. the plans seem to be good...

Best regards.

Philippe

http://home.nordnet....net/miznetf.htm

====================================================================

http://www.cuttinged...com/u-lites.htm

This is a great site for kites, videos and books. The light kit illuminates the kite itself [gee, I never thought of that]. You could do the same thing with three Photons, but at greater expense. On the other hand, you would not have to worry about the wires, and the setup would be lighter. hehehehe

Crash 'what a name for a flyer' Johnson


Newbie Question

Hi All,

I just got back from Newport Beach in Rhode Island where I spent a few hours watching all types of people flying all kinds of kites. Having flown nothing but a $4.99 kite in my lifetime and finding it very boring, I found myself very intrigued by the way these people were making their kites dance to the music. I had to try this. I found the nearest vendor and bought my first stunt kite. I couldn't wait to get started and rushed home to try it out. I am now looking at the directions that came with my Beetle and looking at my Beetle and finding myself very confused.

The instruction manual shows me a picture of two handles with a line coming off of each. My kite included one handle with two lines wrapped around it each with a wrist strap on the end.

Now my question. Did I get shorted one handle or am I supposed to fly my Beetle with two lines attached to wriststraps?

I hope I came to the right place for help. Thanks

-- Ed George

====================================================================

Hi EGeorge,

sounds like you got the Beetle with the spectra line set,,, that's the GOOD stuff.

the thing you called a handle is only a winder to hold your line when the kite is in storage.

straps are a better way to fly, it gives a more personal touch to the kite.

you should pick up flying rather quickly.. just remember to connect the the red line to the right side of the kite and ALWAYS up the red line in your RIGHT hand....if you get the lines in the wrong hand it makes it very dificult to fly, any 2 line stunt kite

check out some web sites and start planning on what you want for your next kite....one kite is never enough, and then there are red, kites , blue kites, ect ect.

tom A.

====================================================================

I've got a Q along the same lines (groan)...

No matter how carefully I wind my lines onto the winder when I've finished flying they're always twisted about a hundred times when I set up for the next flight. I assume it's because I'm twisting the lines as I wind them on, but I've tried once or twice to get them on the winder without twisting them and the outcome was exactly the same the next time I unwound them.

Now I've seen people set up their kites, attach lines, walk casually backwards as the lines come off the winder and take off immediately so I know it can be done - I was just to ashamed to ask such a dumb question. This evening was the last straw as I spent 5 minutes untwisting the lines before I even got going. (Watched, I might add, by a bunch of kids hoping, no doubt, for some sort of impressive show - unfortunately for them this was the maiden flight of my Stranger Level 7 so after 30 seconds of uncontrolled spinning and landing (the fast kind) they left dissapointed just in time to miss the (totally accidental but impressive to me none the less) series of fades.

Anyway, if someone could give me some tips on the line winding front, I'd be gratefull.

Cheers,

Andy.

ps. I think I owe you a bracket from the third paragraph :P

====================================================================

I am also Newbie and I had the same problem the first times. The key is to be systematic: allways hold the winder with the same hand and in the same position, hold the handles with this hand and begin winding in 8 figure. To unwind, hold the winder in the same position and hand with lines attached to the kite and just walk backwards, it would be easy and at most you will have one or two turns in the lines.

Buen Viento Pedro

====================================================================

Andy,

When I bought my first kite I had the same problem but the solution is simple. The trick is to unwind the lines in the opposite direction. But before you do this you must be sure that you have the winder in the same position as when you winded up the lines otherwise you'll add even more twists as you unwind i.s.o. taking out the twists that are caused by winding up the lines. So to wind up take the winder in your left hand and put a mark i.e. on the left top of your winder (with a small piece of adhesive tape or anything else). Now with your right hand start winding around your winder making circles clockwise (away from your body) starting from the wriststraps while you walk towards your kite. Next time you take out your kite all you have to do is assemble your kite and connect your lines and take the winder again in your left hand with the mark in the same position (left top) and now as you walk away from the kite unwind the line with your right hand making cirles anti-clockwise (so towards you i.s.o. away from you as you winded the lines up). At the end you should have no more than one or two twists which will take a couple of seconds to untwist and you're ready to take off.

Good luck,

Carlos

====================================================================

You may need a book. The vendor should have helped with a manual or a video [Kliegs of Mytle Beach SC gave me both with my first kite] Here is a brief flying lesson:

The lines are to be attached to the straps first. Mark one line with a red color on the sleeves at both ends. If your lines are rigged with sleeving, you are in good shape. If not, then it will be tough to give instructions over the net. Are you setup with AOL buddy system? If you are, email your logon and we can chat tonight. The strap handle label may have instructions. Drop the end of the line with a sleeve through the plastic or metal loop on the handle. Then slide the strap through the middle of the sleeved loop of the line. This will lock them together[sort of a figure 8]. Hold the assembled kite in front of you as if it were flying. Mark the right side bridle with red. Always hold the red in your right. Rig the other strap to the other line.

Use a knot called a birdfoot to attach the lines to the kite. here's how - Place the loop of the red line over your thumb and index finger then spread them into a V. Bring the line between the spread out fingers. Touch the finger tips together. There should be a big knot at the end of the bridle on each side. Slide the bridle leader with the big knot in next to your finger and thumb and then snug up the loop so it grabs the bridle leader. Repeat on the other side.

Rig the lines: get two [plastic] tent stakes. Place them in the ground about 3 ft apart. Drop the line straps over them [red right, remember?] Holding the unassembled kite [assistant can do this if available] walk backwards directly down wind, letting the lines unwind. Take it slowly avoiding tangles. lay the lines out about three feet apart when you get to the end. Assemble the kite and place it on its back past the line ends, tip pointed away from the lines. Keep the kite tip pointed down wind, move it to the lines and do the birdfoot knot thing to attach the lines.

Self launching - the easy way: When the kite tips into the wind it will fly. When it lays back it will stay on the ground. Standing inside the lines, position the kite with the tips on the ground and the nose laid back so the kite says in place without assistance. You might have your assistant hold the nose gently. DO NOT have them hold the kite and throw it up. You will hit them for sure. Even in high winds the kite will stay on the ground until you are ready. Hustle back to the handle end. If you have a helper be sure they are well outside the reach of the lines.

Keeping an eye on the kite, pick up the lines in each hand. Do not pull it towards you yet. Feel for equal pull on the lines then pull both gently until the kite launches. Do not panic, most stable kites will move quickly to the zenith. Gently balance the pulls and try to get the kite directly overhead. Gradually move from one side to the other.Pull left, go left. Pull right, go right - unless you wired it backwards.

So, How am I doing, guys? I have been flying alone for about four years, two line and four line kites with a lot of night work.

next week: Landings.

Crash 'just the right name for a flying instructor' Johnson

====================================================================

Hi Andy

Try winding them in a figure 8 manner. It's just as fast, if not faster, as winding them around and around the winder.

Regards James

The sentence above is a bit misleading. I should have said that it's just as fast, if not faster, as winding them around and around the winder in one direction.

====================================================================

Hi Andy, However you wind up the lines you just need to unwind them the same way. That untwists them as much as you twist with the winding. You can't for example wind them up round and round and then roll them off. Personally I think the best way is figure of eight winding on a suitable holder, it stops the lines embedding in the bundle and you don't have any alternative way of unwinding. Regards Tel.

PS How's the Nasa whatsit going?

====================================================================

The trick is to use something like a PRO 8 winder or somesuch, where you wind the lines onto the winder in a figure of eight style, this stops a lot of the twisting and means you can just wind off the line, hook it up to your kite and start flying...

Dazzz

====================================================================

What is happening is that you're winding and unwinding the lines in a different manner. To prevent this, most kiters use a figure-eight pattern and figure-eight winders. If this is doable on your winder, do it. If not, what is happening is that when you wind them up, you're turning the handle over and over, and not turning the handle when you're unwinding them. I have some old handles that you can't figure-eight on that I use as winders, I just make sure never to turn over the handles while winding. (As winders are $3 apiece, there isn't really an excuse for either of us not just to get one or two.)

====================================================================

If you use halo spools: cut a small slit in one side with a hacksaw, and sand it. Now you start with laying the lines (handle side) in the slot and start winding on the other side. Unwind by letting the line slide sideways off the spool: you can't do it the wrong way now, cause if you let it slide off on the wrong side of the spool your line gets caught in the slot you made and your handles are in the way then.

Regards, Peter

====================================================================

Andy, Thought I might try to straighten (groan) you out. (sorry, couldn't resist!) In addition to 'figure eighting' the line, a little tension on the line seems to help. I start my wrap from the handle end (kite face down, pointing towards you) and wrap the line while walking towards the kite, keeping some tension on the line between me and the kite. You can also wrap starting from the other and drag (depends on the condition of the field or beach) the handles towards you.

Steve

====================================================================

its not a handle, its a winder. you did fine, fly it with the 2 lines, holding onto the straps. ask advice from local kiters, and have a patient buddy out with you the first time, youll need him to re launch the kite. (it kinda breaks the spirit to walk out to the kite the first hundred times)

oh and too much, and too little wind is hard to learn with. if your having trouble, remember, it might be environmental, not necessarly mistakes. thats why we kite fools have somany kites, so all conditions are covered.

the beetles a good starter kite, youll have fun.... 'till you have to pay the visa bill on all the other kites youll end up wanting.

'till next time, Rich > Hi All,


3D Standoffs

Anyone out there that can tell me how I want to set my 3D stand-offs where there are four different holes. I guess what I am looking for is what's best, and what noticeable changes there are in flight. Is one better for a lower wind, while another is better for higher winds?

Allen,

====================================================================

I use the following rules of thumb Hope it helps:

FIELD TUNING GUIDE

Standoffs

=========

-- Adjust so that all are perpendicular (right angles) to the spreaders.

-- They help control how much of the sail creates forward drive (lift) and how much it provides stability and tracking (drag).

-- (If there are four standoffs, just move the inner ones) as follows:

CLOSER to spine AWAY from spine More lift (Less precision) (More drag ?) More Precision More speed Less speed Lightest winds and indoor Strongest winds

Bridle

========

Controls the angle at which kite presents itself to the wind (Angle of Attack - AA), as well as how tightly it spins.

If it has a Turbo bridle: Move Outer yokes UP towards nose for: Lighter wind and More lift Move Outer Yokes DOWN towards wintips: Stronger winds, Easier stalls, tighter snappier turns.

Tow points:

=========

Adjustment here alters the inboard / outboard position of the TP relative to the aerodynamic centres of the sail. This affects tightness of spin and oversteer. Moving them INWARDS towards spine allows a tighter spin and more oversteer. Moving them OUTWARDS to the Leading Edge gives a wider turn and a more stable feel.

If the kite pecks with it's nose, the tow points are too long or short

------ Hold the kite by its two tow points and measure the angle of the spine relative to the ground (it should be around 30 degrees). Less than that means the kite is more open or radical. More than that means the kite is more closed and less radical.

A radical kite will be easy to stall, will turn sharper but will require more wind and will be more sensitive to controls. A non radical kite will fly in less wind but will not turn very tightly and will be more difficult to stall. Tricks are easier with a radical kite.

Now if your angle is about 30 degrees or your bridles are on the marks you have a starting point. Try to fly the kite.

If it rises easily to the top of the window but wanders a lot from side to side and seems to turn sloppily and in circles that are too large for your liking it is probably adjusted to high. Lower the bridle setting and retry (make changes of not more than 1/4 inch at a time and, of course, the same on both sides). Do that until the kite flies fine.

If the kite has difficulty taking off your bridle adjustment is probably too low. Raise it and retry. Again go in increments of 1/4 inch at a time. Repeat until the kite flies fine.

So moving the nose backward or away from the pilot makes the kite more radical and moving it forward or toward the pilot makes it less radical.

Regards,

Cat-thief


Illusion Problems

Hi,

I have a problem on my illusion Prism standard 98 model ! It seems that the outer tension-sail standoff isn't enought long... on flying, this standoff unpplug himself ! Do you have also this problem ? I'm going to increase the size of this standoff, by making another one.

Byebye.

THIERRY.

====================================================================

Thierry -

I have the same kite and have not had that problem. Are the standoff connectors perpendicular (90 degree angle) to the lower spreader? How long is your standoff?

David Hansen

====================================================================

Hi,

Thanks for all answers... The longer of the outer standoff is : 17,5 cm ( just the stick, no connector, no clip ! )

I'm going to tape the connector to avoid slipping ....

Bye. THIERRY.

====================================================================

Hi Thierry.

David advice is good. I have often experienced stand-offs fallout after the kite has worn out a bit. Most of them are imputable to connector slipping on lower transverse.

The fix is very easy. I put some electrical tape on each side of the connector if the slippage is random (to the outside or the inside indifferently, or on one side only if the slippage always occur the same way.

For example, on my Jam Session, the two standoffs connectors were always sliding so the two would meet halfway (the stand-offs then showing an inverted V if the kite was on its back). Putting tape inside the outer stand-offs and outside the inner stand-offs was enough to solve the problem.

Of course, sail stretching may occur. Then you could need longer stand-offs. Check that both sides are the same.

While at it, you can also prevent standoff loss by attaching a small loop of line to the stand-off. Slide the spreader through this loop while assembling the kite. That way, if a stand-off pop loose it will at least stay with the kite. Ever tried to find a white stand-off in the snow ? Or a black one during a nigth fly ?

BTW, for that purpose, I use scrap of spectra (that's one reason I dont throw away worned out lines) or even sewing thread (on my SUL kites). Dacron line is also good. The choice is not very critical.

Wind or no wind, fly for fun :-)

Jean (Johnny) Lemire

====================================================================

Hi Jean, John, et al,

I've been using orthodontic rubber bands (#3 or #4) to secure the standoff holders and the standoffs themselves. They're about 3/8" (1 cm) in diameter and very strong. They come in little plastic bags and are useful for all sorts of things. At $6,000 they're a little pricey, but . . .

Cheers, David


Tapered Spars

I am considering reframing a kite using the hip, modern, stylish, wrapped, tapered graphite spars. Just out of curiosity, will this really make a very noticeable difference in the performance of a kite(any kite) over the standard graphite tubing? If there's a big difference, what characteristics improve? Do any kites suffer from reframing this way? How do you determine exactly what spars to buy? I asked questions about tapered graphite a while back, but I now have more questions. Thanks in advance to anyone offering valuable knowledge.

-Kent : Utah Kite Nerd

====================================================================

By "standard graphite" I take it you mean pultruded rods, generally 6mm/0.24" ?

Yes. Wrapped spars cost a lot more :-)

The wrapped construction method offers a better weight- to-stiffness ratio. Generally speaking spars are chosen to offer a little bit of weight reduction with a big jump in stiffness over the normal pultruded spar.

If you are considering tapered spars be aware of the variable deflection under load along the length of the spar (more towards the narrower end). Kites with a relatively straight leading edge would be better off framed in uniform gauge spars.

You can also upset the balance of some kites with reframing and this has particular relevance when the kite is on slack lines (ie; tricking).

Also note that wrapped spars are usually unable to withstand as much deflection as pultruded spars before failure. They are both stiffer and less flexible (NOT the same thing !).

Decide which aspect of the kite you wish to improve. A lighter kite may fly in a little less wind (not as much as you may think however) whereas a stiffer frame will be more repsonsive and be able to withstand higher winds.

It's a bit old now but try:

http://www.kfs.org/~...spars/table.htm

Does this count ?

Mike.

====================================================================

Hi Kent

Great question!

Consult the designer & builder of the kite and ask what they recommend as options. :)))

If that's not possible give Jon or Marianne Trennapohl a shout at SkyBurner Kites (http://www.skyburner.com). They distribute some of the latest in high performance wrapped carbon graphite spars available on the market today.

If they can't direct you to your local kiteshop for immediate service, they will assist you personally.

I imagine that most who have reframed a "kite of choice" with these spars can attest to their ease in installation, their compatibility with fittings, but most of all their incredible performance value.

I've known flyers who reframed the Matheson "Midi" (lower price point) right up to the Benson "Outer Space" (higher price point) with these spars and have noticed a distinct improvement in performance in specific wind ranges; crisper turns and stalls: and improved handling - making for, in their opinions expressed to me, a slightly better to very much better flying experience.

note: degree of flyer skill level may cause different results

The new Sky Shark PT series tubes are one of the best framing options available in kiting today. Try em, you'll LOVE em!

(not a com, just a really big fan)

Color My Sky, Ellen

====================================================================

Hi Kent, hi folks.

The only kite I have tried so far with regular and tapered rods is the Azur's El Pronto. The regular model is framed in pultruded spars. Our team kites were framed in Avia G-Force UL tapered spars. I can only say that it makes a substential difference. The kite is more responsive because of the stiffer frame and also ligther since these are somewhat ligther that pultruded spars. The net result is a kite that fly in lower wind and is more responsive. More responsive means also less forgiving for over control.

To me, the tapering or not is probably not the main factor. Its more the wrapped vs pultruded that makes the difference. Our present team kites (Matrix) are framed in non tapered Skyshark 5P (regular) and 3P (UL). They are also very stiff and responsive.

Another kite that show this difference is the Rev EXP (pultruded) and SLE (wrapped). The SLE is more reponsive because of the added stifness.

I am not affiliated with any of the companies mentionned in this post except that they have been or are our team sponsors.

Wind or no wind, fly for fun :-)

====================================================================

Hi Kent, yes the spars can make a great difference, I replaced a broken spreader on my phantom which uses uses 6mm Hi-structil, with a standard 6mm carbon tube spreader, and the kite was always leaning to one side with the weight difference of the standard carbon....

Dazzz


Multiple Stunters

Hi there, I`m thinking of getting into flying 2 dual liners at once ... one in each hand (kites to be determined). Is there a "rule of thumb" in regard to the distance between the line attatchment points on the handle(s) in relation to the size of kite(s) being flown?

Thanks, Barry Taylor

====================================================================

No magic formula. Basically, the shorter the handles, the lesser the quickness of kite movement, and visa versa. Try different combinations for fun. Too long of handles will result in your wrists tiring out, however.

Hey... by Gosh... THAT's a MAGIC formula!

====================================================================

I think it has a lot to do with the strength of your wrists. A wider handle on a larger wing will generate more stress on your joint.

I'm no expert, but have been doing the hand and waist method for about eight years. Actually, I do it about once a year, but at least I can do it. The handle method appears to give more control.

Hope that helps a bit. Have fun!!

dg

====================================================================

Hi Barry, hi folks.

First, try to find what is the limit of hand movement your kite can take. I mean the difference between your hands when you turn at the maximum spin rate (this may depend on bridle setting).

A heavier setting will means a shorter turn radius but more pull and a lighter setting will means a larger turn radius but less pull.

When I started flying two kites I used pieces of broomstick of about 18 inches (for Tandems, 8 feet kites). I drilled three holes at each ends of the sticks at about 3/4 inch intervals. This allowed me to experiment with different spacing. I found that about 14 inches was optimum for these kites and what I want to do with them. I now use two handles made from PVC piping (schedule 80). These have a slight bend in the middle so as to give some clearance to my fingers when I am at the maximum turning position.

Dave is right that the longer the handle, the harder it will be on your wrist.

After you get good with two, try a sturdy belt with two attachment points on each side. Then you can try three kites at once.

Wind or no wind, fly for fun :)

Jean (Johnny) Lemire


Line Lengths

Hi I'm looking for information about the right lenght for lines to use in competition with SUL STD and VENTED models of kites. I know a lot of readers take part in competition on USA, Uk and other countries. Tanks inAdvance for all.

Bye

Davide B.

====================================================================

The default length seems to be around 150'. This gives you a nice big window to work with, and with practice you can still trick reasonably well. For very high winds some people add short (~20') extensions, and for lighter winds peoplee tend to drop to slightly shorter lighter lines, around 100-120'.

It's also handy to have different strengths of line. 80/90lb is good for light winds, 150lb is a default and 200/300 is good for higher winds. The idea is to use heavier line to slow the kite by it's weight and drag.

For Indi and pairs I use Laser Pro Gold, which I'm sponsored to use, but I chose to use it, as I think it's the best I've tried yet. I have 120' 90lb, 150' 150lb and 150' 200lb. These work well with my Phantom Elites.

HTH.

R.

====================================================================

I use different lengths and weights in different conditions. Assuming a regulation field of 300'x300', then 125' is as long as I go. Longer than that and you can get into trouble with boundaries. In precision, I'll try to use the longest line I can - it makes the figures larger (which can make the errors seem smaller by comparison), and will tend to "calm" an otherwise nervous kite. In ballet, you have more freedom - I'll use different line lengths to adjust the relative "pace" of the kite so that it matches well with the music I'm using. I've used lines as short as 50' and as long as 135' to good effect. I adjust line weight to wind speed - using 200# or even 300# line can really help steady and slow your kite without the potential difficulties associated with line brakes, etc.. Similarly, in really light wind, really light line (35# or 50#) can help the situation be more "fly" than "die". Finally, do yourself a favor and buy the best line you can (I like Laser Pro Gold, but I've been told the Berry ES55 is nice, too...) and set it up carefully. Stretch the line carefully before tying and use good sleeving that's no heavier than it needs to be. I really like the little Moran line equalizer - it saves me time and trouble in getting things even. Keep your competition lines clean and out of the sun when you're not using them - they'll last a long time. Hope this helps...

P-Bert

====================================================================

Hi Davide, hi folks.

Our team uses lines as follow:

- light winds : 90 pounds, 110 feet

- medium winds : 200 pounds, 140 feet

- high winds : 300 pounds, 160 feet

We combine with that the possibilities of using UL or standard kites and also wind tamers for very high winds.

Wind or no wind, fly for fun :)

Jean (Johnny) Lemire


Camera Kite

I know a big kite is needed to hoist up a camera for KAP. But how big? And >what is the cost of the kite needed?

====================================================================

Take a look at:

http://www-archfp.ce...kap/kaptoc.html

- really good site for kite aereal photography!

- nils


Fighter Kites

The following is directed to REED RICHARDS, but anyone knowing the answer to the generic questions asked may certainly respond. Thanks!

Just purchased the "Family Hata" fighter and flew first time late last evening - winds very light.

Very stable fighter!!

Kite was setup as "FLAT", no bend in spine. Used smaller horizontal rod for light wind.

This is only the third fighter I've owned and flown, the other two spin easily, but the Family Hata is "too" stable, not easily turned. I give lots of slack and when kite FLOATS FLATLY and points to left/right, I can fly horizontal. When I get to the end of the window or give slack, kite will right itself then rotate a little past, then I can fly in opposite direction, but not exactly 180 in opposite direction. Do I weight one wing tip with clay to improve turning? (Kite turns very very very slightly clockwise.) Or is there a special technique involved in turning?

Is there a good URL for fighter instructions?

Thanks!

PS Your Family Hata is pictured at:

http://www.foreverfl...-FamilyHata.jpg

Richard Choate

====================================================================

Hi Richard, Just move the bridle point up a bit, until you get the desired spinning.

Pierre Gregoire


Dog Stakes

Hi,

About a year ago when I was at a fly I started talking to a man about flying, and he told me that about a different way of flying with one of those corkscrew dog stakes in the ground and your lines fed through. I guess the effect is that you actually stand behind the kite whem you fly it. I've never done it, but I was thinking about going to the pet store to get a stake. Has anybody done this? If so please let me know if it's worth a trip to the pet store.

Thanks, Mark

====================================================================

Hi Mark, It is definately worth the trip!! Ron Reich has been teaching me how it is done (check out his book Kite Precision). You will need to take some emery cloth to smooth out the burrs on the inside corners first. You also should use heavier line, I don't remember what weight it was. It takes some getting used to, he told me to always remember "pulling left is up and away!" that has saved me and the kite more than once! It is fun having the opprtunity to interact with the kite as you fly, but it takes practice. Good luck. Ken P.S. get some nylon tubing to put on the pointed tip when it is stored in your bag to keep from punching holes in your kitesor bag.

====================================================================

Could you clarify something here, please?

It sounds as if the setup involves standing _downwind_ of the stake, running the lines around the stake at a ~135 degree angle (or so) so they start held by you, go near enough horizontally upwind to the stake, and then loop around the stake and back downwind and away from the ground to the kite?

Presumably you use much longer lines than normal so that you can stand far enough downwind of the stake that you're not looking vertically at the kite?

Or am I completely confused and this is something else? It sounds like a neat idea if it _is_ this, anyway.

(hey, you could do all sorts of neat stuff; fly from beside the kite, underneath it, all over the place. Wonder what an axel looks like from below?)

-- dan

====================================================================

Maybe add a couple of pullys to the stake to cut down on friction??

====================================================================

Am I all wet or could one just transpose the handles??! Y'know, put the left handle in the right hand and vica versa.... or is that too simple?

Bill 8O)

====================================================================

Bill,

I've never seen it but I don't think that it is necessary to change the left and right handle if you're just behind the kite looking at it's back. In this case pulling right will still cause a right turn from the dogstake fliers view but it will actually be a left turn from a normal flying view. This sounds like a great idea to watch your kite flying from a close distance but it also might be a bit dangerous because the kite will pass right in front of your nose and one mistake might crash the kite on your head and of course a low pass is out of the question unless you let the kite hop over the lines. But whoever thought of this dogstake flying must have a very creative mind, I like the idea. I can imagine that one can walk to the edge of the wind window and let the kite stall right in front of you before you catch it etc. I just wonder how other people walking by might react (i.e. falling over your lines cause they don't expect them there!). The only big disadvantage in my view would be the fact that the wind will blow in my face i.s.o. my back. Maybe I'll try it some day.

Carlos

====================================================================

Yep, that's basically the idea. One of those things I've always meant to try but never got around to. Dog stakes are cheap enough (cheaper than beef steaks!) so give it a go! You should be able to use a normal 75' line set tho longer might help. Make sure you don't crash it on your head!

You can also use a dog stake to stake single line kites, but *caution* - make sure it's *very* well into the ground and *very* firm, and keep a constant eye on it - if it pulled out with a big kite on the end it could kill someone.

- Philip

====================================================================

Hi folks.

Yes, its very well explained in Ron's book "Kite Precision".

For the benefit of thoses not familiar with this flying technique here is how to set up:

1 - Install your dog stake at the up wind end of your flying area.

2 - Move downwind at a distance about half of your lines length.

3 - Assemble the kite.

4 - Attach the lines but make sure the kite lay flat on its belly to avoid a premature self launch.

5 - Walk upwind toward the stake.

6 - Thread the line through the handle, hook, carabiner, pulley, whatever.

7 - Go back toward the kite.

8 - Attach your handles, straps, whatever.

9 - Stand the kite in the launch position (at your side) while you hold the handles.

10 - Launch and have fun.

You should use 300 pounds lines for added resistance against the friction in the dog stake handle. Better yet, use a very smooth carabiner hooked to the dog stake and pass your lines through the carabiner. Pulleys are a good idea but forget tricks unless you are certain that the lines cannot get stuck between the pulley wheel and its flanges.

Long lines are a must since your line length will be halved.

Ron Reich write to hold your handles as you would normally do it. It will be in reverse and may take a while for you to adjust (pulling left will make the kite turn right in your view of the kite). Reversing the handles is an easier way of learning this way of flying. However, if you move closer to the side of the window, the perspective may change enough so you can grab the handles like you would do for normal flying.

Try to move backward a little so you will be further apart from the stake than the kite. This is particularly good if doing a ground pass unless you want to test which one is sturdier, your head or the kite :)

This way of flying opens up a lot of possibilities. Imagine doing a good stall just over your head. You could then catch your own kite and then throw it upward and then fly away.

You could also observe from very close what happens when doing some tricks.

One more thing to try would be to:

1 - Install the stake.

2 - Set up your kite, lines and handle like you would do it for normal fly.

3 - Takeoff then walk toward the stake (it would save some time if you place your handles near the stake for takeoff).

4 - While flying, thread the lines through the stake's handle (its feasible, normally these have wide enough gap).

5 - Then, move sideways, the downwing while slowly turning 180 degrees to face the wind.

6 - Continue moving downwind to obtain the position I explained in the beginning of this post. You will need to look over you head or your shoulders to see the kite since it will be in your back.

Of course, all these moves could be reversed before landing the kite.

Why do that ? Only for a good show off and to have plain good FUN :)

Wind or no wind, fly for fun :)

Jean (Johnny) Lemire

====================================================================

In '92, as a greenie to kiting, I saw Lee and Sue doing "solo" flying, it knocked me out. I immediately bought a stake, and tried it with my Spinoff. I launched that 18 oz. behemoth in about a 14 mph wind, standing in the center. Of course, it launched, and then knocked me in the head so damned hard I laid on the grass for 10 minutes before I felt I could get up. DOH.

Moral of the story... for first time dogstaking, don't try it in high wind, and start with a launch from one side of the wind window, not in the center. And all of you thought I am this way because I was dropped on my head as an infant, no, it was from dogstaking.

A little history... Lee Sedgewick is acknowledged to be the first to try this technique. He called it "Solo Flying".. Why Solo? Because he first used it as a method to launch flexifoils.. using a stake, he didn't have to have Sue launch his kite, therefore, SOLO.

He soon figured out other uses for the technique. By '91, he was flying one of his Spectrum dual-liners with a quad-line bridle (maybe the first quad kite), instead of the rev-type handles, the lines were looped... a long loop on each side making the top and bottom lines. He used a series of knots at the point that his lines ran between his fingers, gave him ultimate feel.

To my knowledge, Lee's last solo flight was at Grand Haven '95, flying to "Return To Innocence", by Enigma. He flew with a short tail on the kite, which he let play and encircle his head. True genius at work. The large crowd was as involved with the performance as any one I've seen before, or since.

Lee caused a controversy at an early Wildwood championship, when he entered the field for ballet, screwed the stake into the sand, and flew "Lady In Red", with, of course, a red kite.

We hope to see a reprise of this show in the "Past Masters Challenge" at Muncie in Ocotober.

Mike Gillard

====================================================================

Boy and how. I was begining to get a little worried that no one knew what dog staking was, and the references to Ron only made it worse. Eitherr that or i've been doing this to long. I first saw Lee flying like this in '88 up in Wildwood(the greatest place to fly!)and he totally blew me away. After that i learned how, going on to realize that anything smooth can turn into an instant dog-stake if you are so inclined.

Yes you can switch hands but just like learning fakies on a skateboard or what not, it's better to just learn it. Ron does have a good technique for teaching this called shadow flying, which is really cool.

Once you learn it it comes in handy, like when you launch a 6m or more power kite with the handles in the wrong hand!

total AoxomoxoA brought to you by. . . . . . dean jordan

====================================================================

There's some older video footage floating around of Lee Sedgewick and Sue Taft (hope I got those names right) dogstake flying. Anyone remember the source?

At any rate, as has been pointed out, Ron Reich's Kite Precision (a must for anyone serious about controllable kites, given the paucity of material on the subject) has a chapter on it with pics. This includes thoughts on catching the kite while flying it, in various manners. He does recommend 200-300 #line of 150 feet in length, resulting in an effective flying line of 75 feet with the doubling back.

Jim Poy was just telling me this past weekend that he and son Jeff had a pairs dogstake routine that never really saw the light of the spectators eyes, as perhaps it should have. Pity, that.

Michael [|*|] Michael Raycraft

====================================================================

Hi, We heard about Lee & Sue dog staking years ago. I even have a little video of Sue dog staking in Ore. We tried it once with our Rev's. but after much crashing gave it up. Then we hear, switch your handles in your hands.! TA DA! With some practice you can launch your Rev. off your head! Lol.. I can do that, and do. :ani_wallbash: Though catching it with my hands is ok, the thought of trying to catch it on my head is still a headache away.

Yes, you can catch them or slide it by you. fly it in front of you or step forward and fly it behind you. They still walk and roll too. I've have lines 80-100 ft. and they work great. Still room for lots of practice in my future, it's very fun. But duck if you do it with long tails or you'll get strangled!

And even more exciting. Lee Sedgwick told me to take it indoors. For almost a year, I've been trying to figure out a way to set up something in my gym. Finally I spotted it last week! The pole that is put into the floor for vollyball happened to be up.. and it's going to be just perfect! Now I have to talk them into letting me lug that pole in & out when I fly! I can't wait! So try it!

With Revs.. I would suggest setting up your lines first so you know their not twisted. Your kite can only take so many twist in the lines if you use short ones. BB Penny

PS Many people including kitefliers don't realize what your doing and ask, "How did you fly your kite against the wind like that?" I like to tell them I sugarcoated my lines :) lol (but tell the truth or someone might try it)


Joining Lines

Is there any good way to take two linesets, both of which have (sleeved) loops at both ends, and join them into one long lineset?

Every time I think about how you'd larkshead one set around the other, I keep on getting stuck against having to feed the entire length of one line through the loop in the other; this is possible, but is there some cunning other sort of knot that isn't this painful to tie? Oh, and I guess this needs to be reversible as well, so removing the sleeving and splicing isn't the answer. The nearest practical thing I've come up with involves larksheading one loop around the knot that makes the loop in the other line, but that's really messy and prone to tangles.

Is there a better way?

thanks,

-- dan

====================================================================

Hi Dan

I have never done this but why not place a small length of cord with an overhand knot at each end in between the two lines that you wish to join. You could then larkshead each individual line to the cord. Should work.

Regards James

====================================================================

Dan - I can't imagine why you'd want to join two sets of lines, but if you do, you'll not be able to do any loops (spins, wraps) or your lines are sure to lock up and the damage you could do to your kite would more than pay for another set of lines or two to avoid the need of connecting them. (IMHO) Art Gotta fly!

====================================================================

If you're thinking that the sleeved parts will snag against each other, swap 'line' one around - since both sets probably aren't exactly the same length, the knots will be some distance apart.

----short----X-----------long-----------

-----------long-----------X----short----

-- Ian Newham


Fighter Book

Hi, All;

I'm looking for a book on fighter kites by Wayne Hosking apparently entitled "Fighter Kites and Beyond: A guide to single line stunt kites". If you have a copy or know where I can get one, please let me know.

Thanks,

Michael

====================================================================

Wayne is working for Klig's Kites in Myrtle beach, SC. You might be able to contact him there. Next time I'm down there I'll try to get up with him and ask him about it.

Ray

====================================================================

The last I heard, Wayne was with Kitty Hawk, not Klig's. He is managing the store in Orlando, formerly called Krazy Kites, on International Drive. The phone number is 407-352-2234.

Wayne was talking about a comprehensive fighter book a few years back, but I'm not aware of it actually going to print.

Hope that helps.

dg

====================================================================

Mike,

I thought I heard that he moved to Fla, and was working at Krazy Kites, which is in( I think ) Orlando. This may not be current info, but I hope it helps.

David Hogue

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.