Robertsepolen Posted September 11, 2017 Report Share Posted September 11, 2017 Thanks all for the input! I decided to go with the 1.5 reflex rx and am enjoying it. I am finding all of your input to be true. The last couple of days have afforded some quality flying time and I feel as if I am starting to make a successful transition into quads. I have managed good landings and reverses as well as some good "infinity pattern" flying. Even some tip stands when the wind was consistent. Funny how a little success gets you hooked! thanks again to everyone. 4 Quote Link to comment Share on other sites More sharing options...
makatakam Posted September 11, 2017 Report Share Posted September 11, 2017 20 minutes ago, Robertsepolen said: Thanks all for the input! I decided to go with the 1.5 reflex rx and am enjoying it. I am finding all of your input to be true. The last couple of days have afforded some quality flying time and I feel as if I am starting to make a successful transition into quads. I have managed good landings and reverses as well as some good "infinity pattern" flying. Even some tip stands when the wind was consistent. Funny how a little success gets you hooked! thanks again to everyone. Glad to hear you're having fun. It gets even better. 1 Quote Link to comment Share on other sites More sharing options...
JWharton Posted September 11, 2017 Report Share Posted September 11, 2017 Glad to hear you're having fun. It gets even better. Sure does[emoji41]Sent from my SM-G903F using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
John Barresi Posted December 22, 2017 Report Share Posted December 22, 2017 Relevant I think, cued at 15:23... 4 Quote Link to comment Share on other sites More sharing options...
John Barresi Posted June 22, 2018 Report Share Posted June 22, 2018 Added the Djinn to the lead list / post. 3 1 Quote Link to comment Share on other sites More sharing options...
riffclown Posted June 22, 2018 Author Report Share Posted June 22, 2018 14 minutes ago, John Barresi said: Added the Djinn to the lead list / post. Aye, Good call and Appreciated. 1 Quote Link to comment Share on other sites More sharing options...
makatakam Posted June 22, 2018 Report Share Posted June 22, 2018 The "s" is missing from Transeye in the list. You should correct that so we don't mislead or confuse newcomers. Quote Link to comment Share on other sites More sharing options...
happysuperbutton Posted June 25, 2018 Report Share Posted June 25, 2018 On 6/22/2018 at 8:21 AM, John Barresi said: Added the Djinn to the lead list / post. !!! Daydreaming now about hand collecting a new djinn at BKF.. #restless 1 Quote Link to comment Share on other sites More sharing options...
John Barresi Posted June 25, 2018 Report Share Posted June 25, 2018 I won’t be bringing Djinn for sale on the Berkeley field (if I have them by then) out of respect to Highline Kites (no Djinn resale yet) and to Revolution Kites who pays for a learn to fly field and supports the festival as a sponsor, though it might possible to meet somewhere offsite... IF they’re ready by then. 5 1 Quote Link to comment Share on other sites More sharing options...
riffclown Posted June 25, 2018 Author Report Share Posted June 25, 2018 1 hour ago, John Barresi said: I won’t be bringing Djinn for sale on the Berkeley field (if I have them by then) out of respect to Highline Kites (no Djinn resale yet) and to Revolution Kites who pays for a learn to fly field and supports the festival as a sponsor, though it might possible to meet somewhere offsite... IF they’re ready by then. 🏁 Great show of respect and a prime example of how to do business as part of a community.. Wish I could like it twice! 5 1 Quote Link to comment Share on other sites More sharing options...
John Barresi Posted June 25, 2018 Report Share Posted June 25, 2018 Don’t get me wrong, I might fly the Djinn if I have them by then but folks will see the learn to fly field and figure those are the kites - anyone not in the know should probably get something else first anyway. 🙏🏻 1 Quote Link to comment Share on other sites More sharing options...
Zendal Posted August 7, 2018 Report Share Posted August 7, 2018 There are Qunlon and Hengda on eBay besides Freilein and revolution. I an OSKUSA Freilein Vertigo from Andy at Ocean Shores Kites. Thanks to Elmo264 I finally got it flying at the kite festival Saturday. 1 Quote Link to comment Share on other sites More sharing options...
RobB Posted August 8, 2018 Report Share Posted August 8, 2018 OSK is a trustworthy source, but please stay away from those too-good to-be-true eBay kites. Something sets off my Spidey sense when it's 1/3 the price of all the other kites. Maybe it's because I'm from NY, and have a 6th sense for the scam, but I never bought into that trap. I spent market $$$ for all my kites, and have not been too disappointed... I need to figure out how to replace all my Rev kites with Kite Forge kites, though. It's amazing how the kite funds dry up as the kids grow up ! 3 Quote Link to comment Share on other sites More sharing options...
PaoloM Posted November 16, 2018 Report Share Posted November 16, 2018 After 20+ years flying rev I got really curious about the Fulcrum and how it flies, its 3D shape and curves, and the fact that looks like a piece of modern art flying. I should be able to tell you more about it this Sunday hopefully. Quote Link to comment Share on other sites More sharing options...
Wayne Dowler Posted November 16, 2018 Report Share Posted November 16, 2018 Someone posted on FaceBook about their Fulcrum fittings tearing! Not sure if it was used in too high a wind, but some suggested different fittings that are "stronger"? Can't tell you much about them - only got to try someone else's and that at the wrong time for the kite. Quote Link to comment Share on other sites More sharing options...
PaoloM Posted November 16, 2018 Report Share Posted November 16, 2018 I have no idea, but hard to believe what “someone on Facebook” said 😉 got a link? Fittings and spars don’t just fall apart. I’ll tell you when I get one. But knowing Carl I doubt that. Quote Link to comment Share on other sites More sharing options...
Wayne Dowler Posted November 16, 2018 Report Share Posted November 16, 2018 Looking, but not finding yet. They had pic of it. Maybe not seated fully, but they stated it happened on both their std and vented models. Quote Link to comment Share on other sites More sharing options...
khsidekick Posted November 16, 2018 Report Share Posted November 16, 2018 I’ve had 2 issues with my Fulcrum. 1st one my son was flying it in 5mph wind. He was backing it down from the top of the window and the center section of the light wind frame snapped putting a hole in the kite. Most likely a gust hit the kite that over loaded the frame causing it to snap. 2nd issue was my error in disassembling the kite. While pulling out the “leading edge” I broke one of the inner upright spars. Make sure you hold them firmly when pulling the leading edge out. My Fulcrum was one of the first ones sold and they switched to a stronger tube to reduce the risk of this happening. When I ordered the part from Kites and Fun Things they sent me 2 so I could change the other one out too. Fun kite to fly have fun. Sent from my iPhone using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
khsidekick Posted November 16, 2018 Report Share Posted November 16, 2018 I’ve had 2 issues with my Fulcrum. 1st one my son was flying it in 5mph wind. He was backing it down from the top of the window and the center section of the light wind frame snapped putting a hole in the kite. Most likely a gust hit the kite that over loaded the frame causing it to snap. 2nd issue was my error in disassembling the kite. While pulling out the “leading edge” I broke one of the inner upright spars. Make sure you hold them firmly when pulling the leading edge out. My Fulcrum was one of the first ones sold and they switched to a stronger tube to reduce the risk of this happening. When I ordered the part from Kites and Fun Things they sent me 2 so I could change the other one out too. Fun kite to fly have fun. Sent from my iPhone using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
PaoloM Posted November 16, 2018 Report Share Posted November 16, 2018 Well Carl does recommend to push those fittings “all the way in” in the assembling video, might have been that. Quote Link to comment Share on other sites More sharing options...
khsidekick Posted November 16, 2018 Report Share Posted November 16, 2018 I’ve had 2 issues with my Fulcrum. 1st one my son was flying it in 5mph wind. He was backing it down from the top of the window and the center section of the light wind frame snapped putting a hole in the kite. Most likely a gust hit the kite that over loaded the frame causing it to snap. 2nd issue was my error in disassembling the kite. While pulling out the “leading edge” I broke one of the inner upright spars. Make sure you hold them firmly when pulling the leading edge out. My Fulcrum was one of the first ones sold and they switched to a stronger tube to reduce the risk of this happening. When I ordered the part from Kites and Fun Things they sent me 2 so I could change the other one out too. Fun kite to fly have fun. Sent from my iPhone using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
PaoloM Posted November 16, 2018 Report Share Posted November 16, 2018 I see. Thanks! Quote Link to comment Share on other sites More sharing options...
Wayne Dowler Posted November 16, 2018 Report Share Posted November 16, 2018 I don't see the pic, my computer skills are minimal, search doesn't turn up anything. I believe it was someone that is in Europe that made the post with pic of torn fitting. At Fuerteventura?? Quote Link to comment Share on other sites More sharing options...
Wayne Dowler Posted November 16, 2018 Report Share Posted November 16, 2018 Got some needed FaceBook help: should find on Jens Schneider's page Quote Link to comment Share on other sites More sharing options...
PaoloM Posted November 16, 2018 Report Share Posted November 16, 2018 That looks pretty bad. I hope they fixed the issue with better fittings or a cap on that spar. Maybe wrong assembly? Quote Link to comment Share on other sites More sharing options...
_(on-light)110px.png.f871ac6915a5dfb149c2fb26bbaf0493.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.