rev custom bridle

[ant man]

i made my own rev bridles so far i made 4 2 for the 1.5 and 2 for my supersonic they work great the purpose is so they would take the beating of the jersey share sandy beaches

[Penny Lingenfelter]

Anthony.. I'm confused... not unusal, but you made two bridles for each? Didn't they already have bridles? Did something go wrong with them? BB Penny

[ant man]

penny i made 2 because i have 2 1.5 kites and and i made 2 for my supersonic i wanted a spare one for that kite i still have the stock bridles for both in light winds 3 to 6 mph i use the stock because its lighter then the one i made the one i mad is better for a moderate wind of 8 or higher

[Penny Lingenfelter]

Are they SUL kites? they must be if you are saying 8 mph max. Even the EXP has a 15 MPH upper range.

I've never had a bridle snap or heard of one. It could have happened and I hadn't heard. Did you keep the bridle the same or modify them?

BB Penny

[ant man]

i do the same adjustments as they have for some reason the beach here has tough sand this is the first bridle ive had problems with i like this design better it so far holds up well bot kites are regulars but i do fly them on light winds my next plan is a blast bridle

[Penny Lingenfelter]

You go boy! It's caps that take the most beating on my Revs. That and the mesh. Yeesh.. I'm hard on kites. BB Penny

[ant man]

yea the mesh screen on top of the 1.5 does get weak after time for small rips i just use a tiny piece of tedlar tape i try to use the smallest piece i can to keep from loseing the venting however my vented 1.5 vents have never had a problem the only mesh problem ive had was the le on the 1.5 i too am pretty hard on kites and fly them in some wild areas its much more fun then everyday just flying 1 or 2 kites in a beach or field