how to make qund kite lines with handle

[wwb007ea]

How to make handle lines,thank.

[wwb007ea]

On 2021/5/27 at AM12点06分, Bunduki Vlieger said:

你从哪里来？欧洲？那我可以帮你。

thank you , I  from China,you can give me some advice or draw picture for me. Ok ?

[Edmond Dragut]

handle lines? I assume from the pictures you ask about leaders. Most of us use John Barresi model. Longer than factory with multiple knots for fine adjustment.

If I am not wrong the top ones are around 9 inches long with knots from ¾ to ¾ with 7 knots. Bottom ones are around 4-5 inches with knots from ½ to ½ with 4 knots.

you will find to buy new here 

 

[wwb007ea]

6 hours ago, Edmond Dragut said:

处理线？我从你问到的关于领导人的图片中推测。我们大多数人使用约翰巴雷西模型。比工厂长，带有多个结可进行微调。

如果我没记错的话，顶部的大约 9 英寸长，结从 ¾ 到 ¾ 有 7 节。底部的大约 4-5 英寸，结从 ½ 到 ½ 有 4 个结。

你会发现在这里买新的 

 

Thanks，how long from top handle to the first knot that is i hope know.

[riffclown]

The measurement isn't super critical as long as your pair matches.  First knot is generally anywhere from 5 to 6 inches out for top leaders. Usually around 2 inches for the bottom.. The Key Trick here is the even spacing for the top knots is wider spacing than the even spacing for the bottom leaders.. This allows you to fine tune.

[wwb007ea]

Why the even spacing for the top knots is wider spacing than the even spacing for the bottom leaders?

[riffclown]

So you can fine tune.. If you move in one knot at the top (3/4") and in one knot at the bottom (1/2') you've actually created a 1/4" adjustment..

You can effectively tune out very small inequalities in the actual lines..

[wwb007ea]

7 hours ago, riffclown said:

所以你可以微调......如果你在顶部移动一个结（3/4"），在底部移动一个结（1/2'），你实际上已经创建了一个 1/4" 调整..

您可以有效地排除实际线路中非常小的不等式。

thank you very much ,that is a problem about math，it is so funny.   thanks,  haha, I finally understand  why knot 3/4 for top line and 1/2 for boteem line.