riffclown Posted July 4, 2019 Report Posted July 4, 2019 Starting a commissioned sail with Purple, Royal Blue and Fluorescent Green. LE, Edge binding, etc will be Black. Initial Strips are cut and basting is underway. More Soon. 1 Quote
riffclown Posted July 6, 2019 Author Report Posted July 6, 2019 Sail is progressing quickly. I expect to start sewing this weekend. 1 Quote
riffclown Posted July 6, 2019 Author Report Posted July 6, 2019 The Center pattern has been completed, Initial LE Trim has been done and sewing is underway. The rulers are place to give a very rough sizing of the final kite. Everything outside the yellow rulers will be part of the bag along with the initial LE trim or waste. The initial LE trim leaves an additional inch at the top to allow me to trim the loose threads from sewing at the same time I trim to marry it to the LE. Hoping to try this kite out at the Wright festival before sending it on its way to the new owner. ****NOTE, because I don't use an actual pattern all of my kites really are slightly different, I do bridle test each one along with a test fly if possible. If it's not a kite I would keep for myself, it's not a kite I would pass on to others.. Quote
riffclown Posted July 6, 2019 Author Report Posted July 6, 2019 Framing and Edge binding remain. Bridle is ready. Frame is cut.. 2 Quote
riffclown Posted July 7, 2019 Author Report Posted July 7, 2019 All Done. A couple of shots from the Bridle Test. 2 Quote
riffclown Posted July 14, 2019 Author Report Posted July 14, 2019 Maiden Flight at Wright.. This kite is ready for its new owner. 2 1 Quote
riffclown Posted July 15, 2019 Author Report Posted July 15, 2019 Quick 2 minutes worth of video. Winds less than 5 and dropping to much less than 5. The kites in the background are indicative of the conditions.. 3 Quote
The_Gregors Posted September 7, 2019 Report Posted September 7, 2019 I am just getting started with kite design. What software do you use to design before you sew the sails? Thanks. Quote
riffclown Posted September 7, 2019 Author Report Posted September 7, 2019 3 minutes ago, Robot-Engineer said: I am just getting started with kite design. What software do you use to design before you sew the sails? Thanks. To visualize the finished color layout, I use a colorizer that I adapted for my needs for my diamonds pattern layout but no software designs for these.. The entire pattern for the overall kite is in my head. I only use layout boards for bridles and leading edge. It's amazingly undisciplined. That's what no two of my kites either look or fly alike. Quote
DonFibonacci Posted September 9, 2019 Report Posted September 9, 2019 On 9/7/2019 at 9:42 AM, Robot-Engineer said: I am just getting started with kite design. What software do you use to design before you sew the sails? Thanks. it's not specialized for kites, but I've had good luck with LibreCAD. Plus it's free to download. Quote
_(on-light)110px.png.f871ac6915a5dfb149c2fb26bbaf0493.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.