SparkieRob Posted December 7, 2016 Report Share Posted December 7, 2016 To correct an over flying SLK is it better to: A) Load the kite with drag such as fuzzy tails or tubes, or Put on some laundry on the line to pull it back? Thanks. Sent from my iPhone using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
makatakam Posted December 7, 2016 Report Share Posted December 7, 2016 Using laundry will change nothing. That only changes the "stake" location, so to speak. It only shortens the effective length of the flying line. Additional drag will do the trick, as well as tipping the nose of the kite back by moving the bridle point lower. You can also change the attitude of the kite (angle of attack), by varying the tension of the trailing edge. Less tension will increase drag, just as using tails or drogues, but not as dramatically. However, decreasing the tension of the trailing edge will cause it to fray faster. As everything involving aerodynamics, any change you make will be compromise. Improving performance of one characteristic will change that of another, and so on . . . . . You make changes as necessary, and settle for a compromise of what works best. 2 Quote Link to comment Share on other sites More sharing options...
RobB Posted December 8, 2016 Report Share Posted December 8, 2016 What kind of kite? Most Deltas have at least two points to attach the flying line. I've only had this problem with deltas & the DopeRo. The amount of bow you give a flat kite also has something to do with it, if applicable... Quote Link to comment Share on other sites More sharing options...
SparkieRob Posted December 8, 2016 Author Report Share Posted December 8, 2016 What kind of kite? Most Deltas have at least two points to attach the flying line. I've only had this problem with deltas & the DopeRo. The amount of bow you give a flat kite also has something to do with it, if applicable... My 3 meter delta. It has a fixed tow point so AOA can't be changed. It flies incredibly verticle and have been playing around with different load points. Even with a 15 meter tube tail it flies at a very high angle. When I load the line in the first 10-15 meters from the kite it drops it back a bit. Just wanting to see what's what. One of the good things of flying high is it tends to fly in very slight breezes. Sent from my iPhone using KiteLife mobile app Quote Link to comment Share on other sites More sharing options...
RobB Posted December 8, 2016 Report Share Posted December 8, 2016 Maybe punch a grommet an inch or two ahead of the tow point, in the keel. It might help to pull the nose down. Also, I've found Deltas to be some of the most finicky SLKs to fly. They are tough to get to that point where you can set them & forget them, Most need attention every few minutes. I like to fly mine with l-o-n-g tails. Flow-tails and Pyros are a different story, they seem to be well behaved & forgiving. 3 Quote Link to comment Share on other sites More sharing options...
makatakam Posted December 8, 2016 Report Share Posted December 8, 2016 Another option would be adding weight to the bottom of the spine. A 3-meter delta should handle 1/2 to 3/4 of an ounce easily. 1 Quote Link to comment Share on other sites More sharing options...
Wayne Dowler Posted December 8, 2016 Report Share Posted December 8, 2016 9 hours ago, makatakam said: Another option would be adding weight to the bottom of the spine. A 3-meter delta should handle 1/2 to 3/4 of an ounce easily. Should be easy enough to try, using a bit of line laying around. Try using washers, larkshead them as a unit through the holes, then larks them to the spine. Add or subtract washers til happy with the results! On the plus side - it isn't permanent and can be abandoned if no good! 1 Quote Link to comment Share on other sites More sharing options...
SHBKF Posted December 8, 2016 Report Share Posted December 8, 2016 Wisdom from you all, hints that might never arrive in my thoughts, help sent to me like you've all read my mind. And it seems like it's just when I need it. I love the KiteLife. Thanks, you all have "Know Eye Deer" how you've helped someone just out here in the sticks. Well, maybe you do. Best Wishes, SHBKF 1 Quote Link to comment Share on other sites More sharing options...
SparkieRob Posted December 8, 2016 Author Report Share Posted December 8, 2016 I would've thought that drag via a tube tail on the back of the kite is effectively the same as a tail weight. Sent from my iPhone using KiteLife mobile app 1 Quote Link to comment Share on other sites More sharing options...
RobB Posted December 9, 2016 Report Share Posted December 9, 2016 After thinking about this today, maybe a tow point behind the existing one is the answer. If the kite is overflying you, it might all ready be too nose-forward. If it were me, I would pop a grommet ahead and behind the existing tow point and experiment. It can't hurt, and you would then have 3 tow points for all different kinds of wind. Quote Link to comment Share on other sites More sharing options...
makatakam Posted December 9, 2016 Report Share Posted December 9, 2016 6 hours ago, SparkieRob said: I would've thought that drag via a tube tail on the back of the kite is effectively the same as a tail weight. Sent from my iPhone using KiteLife mobile app They both have the same effect, but accomplish it different ways. Tails and drogues keep it from overflying by adding drag to pull the sail downwind. Tail weights change the angle of attack to a more nose back attitude. Both will reduce or eliminate overflying by not allowing to fly as nearly overhead. Tails and drogues are much prettier, but in a crowded sky, think festival, the weight will keep you out of being part of the tangle. Quote Link to comment Share on other sites More sharing options...
GammoRay Posted January 2, 2017 Report Share Posted January 2, 2017 To keep a delta or other kite from overflying, do one of the following:• Attach the line on the delta's keel or kite's bridle closer to the tail! (Attaching closer to the nose tends to cause overflight and should be used only in higher winds where overflight is no problem.)• Attach drag to the tail end of the kite. Drag can be anything that catches the wind— flat tails, tube tails, fuzzy tails, drogue, spinner, wind sock, etc. Attaching to the spine will steer the kite into the wind most efficiently. Attaching two identical tails to the kite wingtips is possible if perfectly balanced, but a fuzzy tail looped from one wingtip to the other maintains equal drag at all times (and uses half the sky of long tails— good for crowded fests).Attaching weight or drag to the line (laundry) anywhere below the tow point does nothing to cure overflight and may actually encourage it by effectively shortening the tow line, lessening the distance the kite must fly to achieve its overfly angle! Do one of the methods mentioned above!Sent from my iPhone using KiteLife mobile app 3 Quote Link to comment Share on other sites More sharing options...
Mikefule Posted May 8, 2017 Report Share Posted May 8, 2017 On 09/12/2016 at 4:14 AM, makatakam said: They both have the same effect, but accomplish it different ways. Tails and drogues keep it from overflying by adding drag to pull the sail downwind. Tail weights change the angle of attack to a more nose back attitude. Both will reduce or eliminate overflying by not allowing to fly as nearly overhead. Tails and drogues are much prettier, but in a crowded sky, think festival, the weight will keep you out of being part of the tangle. However, , where a weight will pull the back down towards the ground and the nose up, a tail will tend to pull the back downwind thus turning the nose down a little. I have one kite that is bridled in such a way that it would "fly downwards" without a tail. With the drag of a tail, all the angles change and it flies well. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.