Jump to content
KiteLife Forum

cjkramos

Members
 View Profile  See their activity

  • Posts

    30

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by cjkramos

  1. cjkramos
    You can order directly from Bazzer himself but you will have to pay for shipping from Australia. I know of two shops in the US that sometimes carries his stuff in low quantities so you’ll have to call to see what colors and models are available. They are Ocean Shores Kites and flying smiles kites. Last time I checked, the ash is still available. Sent from my iPhone using Tapatalk
  2. cjkramos
    https://www.kitesandfunthings.com/Products/Sky-Shark-P-Series-Tubes__SSPSERIES.aspx
  3. cjkramos
    You could create your own frame set and replace the end caps. should be cheaper than $100. https://www.kitesandfunthings.com/Departments/Kite-Parts.aspx
  4. cjkramos
    Reason I asked is because the picture looks like it has frame and bridle. I won a bid on ebay last year for a sail only rev kite. It had no bridle and frame. @Boostt since these are your only posts on this forum, do you have references or are you a long time member of any other forum like gwtwforum.com?
  5. cjkramos
    Interested. Does it come with bridle?
  6. cjkramos
    Andy from Ocean Shores Kites let me demo the standard and the vented models last fall. We started with the standard in around 5-6 mph and when the wind picked up over 10mph we switched to the max. the vents really helped with the increased wind. I'm still a beginner to dual line tricks so I'm unable to really get into how well I was able to do tricks like axles and such.
  7. cjkramos
    Here's a similar thread. Doesn't seem like there's a great solution for you.
  8. cjkramos
    The ends fraying is common and so is the wear from the vertical Spars. The newer Revs and OSK Freilein Quad Kites I have already have Mylar wear strips pre-installed as well as folded and sewn leading edge ends. JB offers a service to install Wear Strips: as for the fraying ends, I've read ppl using a lighter to burn them off. Haven't tried that myself.
  9. cjkramos
    For line weight and length I usually refer to this video As for brands, Laser Pro Gold is a popular choice but I've been trying out the lines that Ocean Shores Kites sells and its 30-40% cheaper. So far I've been happy with them.
  10. cjkramos

    First look!

    cjkramos replied to John Barresi's topic in Djinn

    going to make a few FS threads the closer it gets to the release of this kite
  11. cjkramos
    Ok. I just now see it Sent from my iPad using Tapatalk
  12. cjkramos
    Lol I’ve been staring at this pic for a while now. I give up. Please tell me what you see. Sent from my iPhone using Tapatalk
  13. cjkramos
    I only have p300 verticals that came with a used 1.5 SLE I acquired. Sent from my iPhone using Tapatalk
  14. cjkramos
    Any progress on my quote? Sent from my iPhone using Tapatalk
  15. cjkramos
    The first link I posted in the OP is for a ready to install set. Ferrules already installed. Sent from my iPhone using Tapatalk
  16. cjkramos
    I ended up ordering all of them. $75 + $15 shipping. I’ll post up some hd pics and maybe my impressions if the weather up here in Seattle cooperates. Sent from my iPhone using Tapatalk
  17. cjkramos
    Pm sent
  18. cjkramos
    I use a lot of Skyshark and have never had the slightest issue, but I haven't used the CXL. I can't imagine them being anything but top notch.. ****Big note though. Keep in mind the outer diameter is slightly larger than Rev or standard Skyshark rods so you will probably have to alter, adjust or replace your endcaps from stock.. Ok. Good to know. With shipping it’s $90 Sent from my iPhone using Tapatalk
  19. cjkramos
    I tried searching and couldn't find any info on these. Has anybody had any experience with them? $90 shipped for all three sets seems too good to be true. http://www.kitesandfunthings.com/Products/QUAD-FRAME-KITS__quadkit.aspx http://www.kitesandfunthings.com/Products/SKY-SHARK-CXL-CARBON-TUBE__sscxlcarbontube150.aspx
  20. cjkramos
    Rev EXP OSK/Freilein Exodus Max OSK/Freilein Exodus Standard OSK/Freilein Exodus Mid Rev Reflex XX Rev 1.5 B Standard Rev 1.5 B Mid Vent Rev 1.5 B Full Vent Rev 1.5 SLE Rev Reflex 1.5 RX Rev Reflex 1.5 RX Spider It looks so bad when I write it all out
  21. cjkramos
    Things to note when I was looking at these 2 models recently - Revolution has added reinforcement strips to the back of the 1.5 classics behind the verticals. (see pic) The set of B-series I got did not have this but can be added by JB as a service. - You will get 2 sets of vertical spars 1 set with springs and 1 set without with the 1.5Classic. I have heard you get 2 frames as well with the B-series but mine only came with 1. $299 for the B Series from the Kite Shoppe and $199 for the Classic from awindofchange.com - You can get the 1.5 classic in standard, mid, and full vent
  22. cjkramos
    Why not buy the rev clone if you loved it? I have a few Bseries and a few OSK/Freilein Exodus kites and they feel really similar to this noob.
  23. cjkramos

    Fulcrum

    cjkramos replied to windwarrior's topic in Quad Heads

    does this anatomy diagram help any? https://www.pictaram.org/post/Ba_9VxenaUN
  24. cjkramos
    So i found a great deal on a Widow NG Special a while ago but then afterwards was wondering what exactly does that "Special" title entail? Also in my browsing I found a Premier/KHK Skyscraper that is the same design and specs but at a ridiculously lower price of $119.99 https://store.kittyhawk.com/products/skyscraper-stunt-kite-176336 Does anybody know the differences between these models? Pictures attached
  25. cjkramos
    That’s good they come with 150# now. I have three older quantums and they came with 90#. Snapped one 90# line at WSIKF this year in around +15mph wind. It was a good learning experience. Sent from my iPhone using Tapatalk
×
×
  • Create New...